Part time Doctorate Program in Engineering in Czech Republic

View Part time PhD Programs in Engineering in Czech Republic 2017

Engineering

Earning a Ph.D. requires extended study and intense mental effort. A PhD is an academic study on which you concentrate for four to six years after obtaining your master’s degree, and that leads, if successful, to a PhD degree, the highest academic degree.

Upon advancements in applied sciences and engineering studies, you are awarded a doctorate in Engineering. The education in Engineering PhD results into innovation, research and excellent training in the field. You can enroll for the course in many of the UK and US universities as well as other applicable institutions worldwide.

Czech Republic is in the heart of Europe is a neighbor of Slovakia, Austria, Germany, and Poland. Czech universities offer long-standing reputation and interesting specializations.

Contact Schools Directly Best Part time Doctorate Degrees in Engineering in Czech Republic 2017

Read More

PhD in Materials Engineering

University of Chemistry and Technology, Prague
Campus Part time 4 years Open Enrollment Czech Republic Prague

Material Engineering is focused on a very complex area of research, development, preparation, processing, characterization and use of materials for various applications. This includes both the theoretical bases of material processes, particularly physics and chemistry of heterogeneous systems, kinetics of solid-state reactions and transport phenomena and the area of evaluation of functional properties of various kinds of materials for specific applications. [+]

Best Part time Doctorate Studies in Engineering in Czech Republic. Overview Material Engineering is focused on a very complex area of research, development, preparation, processing, characterization and use of materials for various applications. This includes both the theoretical bases of material processes, particularly physics and chemistry of heterogeneous systems, kinetics of solid-state reactions and transport phenomena and the area of evaluation of functional properties of various kinds of materials for specific applications. As for the materials applications, dissertation theses are focused primarily on materials for electronics, photonics and materials for bio-applications. Considerable attention is also paid to nanostructured materials, their preparation, properties, analyses and evaluation of toxic effects. During the study and own research work, the students obtain thorough knowledge about the preparation and properties of various kind of materials. They will meet the advanced analytical and characterization methods for study of dependence among materials composition, structure and properties of materials (including of biocompatibility), as well as the mathematical methods and models for describing the technological processes and properties of materials. Careers The graduates will find employment in basic and applied materials research at universities, academicals institutions, research or technological centres in the Czech Republic or abroad. Further on, the graduates can be also be found in materials oriented industry at higher management positions connected with research and development. Selection of recent theses Influence of Temperature on Properties of Au Nanostructures Cell´s interaction with modified polymers Surface properties of Au nanolayers on polymer and glass substrate Study of Electrophysical Anomalies of Thin Conductive and Semiconductive Layers Deposition and characterization of carbon layers Ohmic contacts on SiC with limited reactivity Nanostructuring of solid substrate surface [-]

PhD in Macromolecular Chemistry

University of Chemistry and Technology, Prague
Campus Part time 4 years Open Enrollment Czech Republic Prague

The field of study is concerned on synthesis of macromolecular substances and modification of natural polymeric compounds and understanding relation polymer structure - properties. During the study and research work, the students obtain knowledge about methods for polymer characterization. [+]

Overview The field of study is concerned on synthesis of macromolecular substances and modification of natural polymeric compounds and understanding relation polymer structure - properties. During the study and research work, the students obtain knowledge about methods for polymer characterization. They will adapt advanced analytical methods for polymer characterization, composition of materials as well as the mathematical method and models for description the technological processes of polymer production. Careers The graduates find employment in basic and applied research in the fields of macromolecular chemistry, processing of polymer materials, polymer recycling and pharmaceutical chemistry at universities, research institutes in the Czech Republic and abroad. Selection of recent theses Biodegradovatelné polyestery vhodné pro přípravu mikrovláken Cryogels for applications in tissue engineering Biologicky rozložitelné polymerní materiály Nové polyuretany na bázi polykarbonátu: příprava a multidisciplinární charakterizace Studium přípravy a vlastností vysoce větvených polyimidů a materiálů na jejich bázi The preparation and structural characterization of hybrid inorgano-organic polymer systems/ The develop and application of solid state NMR techniques The praperation and characterization of poly(α-amino acid)s scaffolds for tissue engineering Catalytic conversion of carbon oxides to new polymeric materials [-]

PhD in Chemical Engineering

University of Chemistry and Technology, Prague
Campus Part time 4 years Open Enrollment Czech Republic Prague

This PhD program study deals with the education and development of highly qualified persons interested in many branches of chemical engineering. Students solve practical or theoretical problems in well-equipped laboratories and/or on powerful computers. [+]

Best Part time Doctorate Studies in Engineering in Czech Republic. Overview This PhD program study deals with the education and development of highly qualified persons interested in many branches of chemical engineering. Students solve practical or theoretical problems in well-equipped laboratories and/or on powerful computers. Currently we offer PhD projects in the following topics: functional micro and nanoparticles, chemical robotics, engineering of polymer and porous materials, energy storage, microfluidics, microreactors, microsensors and microfabrication, electrokinetics and electrochemical processes, process control and design, development of column unit operations, fundamentals of mass transfer, flotation and surface phenomena, nonlinear dynamics of chemical and biological systems, fire dynamics and systems for fire protection, bioreactors with enzymes and cells, fundamentals of heterogeneous catalysis, automotive catalysts. Careers Chemical engineering provides the students with universally applicable education in many areas of industry, research, business and administration. Our graduates typically get highly valued positions in chemical and pharmaceutical industry, in process design and software companies or in scientific and educational institutions over the world. Selection of recent theses Synthesis and characterization of magnetic nanaoparticles for applications in chemical robotics Sorption processes in amorphous and semi-crystalline polymers Formation of liposomes for controlled release of reactants and actives Study of synergic effects in arrays of coupled cells with mutual interaction InkJet fabrication, characterization and application of calcium alginate microcapsules Wetted-wall column study of absorption and distillation process analogy Application of the perturbation and response method in the study of pH-oscillatory reaction STUDY ON ENZYME REACTIONS IN SLUG FLOW MICROSYSTEMS Multi-scale Modelling of Evolution of Hetero-phase Polymer Systems Electrochemical preparation of metallic microstructures for microfluidic devices [-]

PhD in Applied Geology

Charles University Faculty of Science
Campus Part time 4 years September 2017 Czech Republic Prague

A graduate of the Applied Geology Ph.D. program has acquired deep knowledge in the field of engineering geology focused on theoretical and experimental soil and rock mechanics as well as geotechnical mathematical modelling. [+]

Applied geology with specializations of geology of mineral deposits, engineering geology, hydrogeology, applied geophysics, environmental geology and geochemistry is focused on study and the use of the rock environment and its protection. ENGINEERING GEOLOGY Engineering geology applies the geological knowledge in design and construction in all branches of civil engineering, in mining and in urban planning. It is an interdisciplinary field in between the science and technology. Using technical or rather mathematical methods, the knowledge gained by geology is applied in analyzing geodynamic processes and the interaction between the rock and civil engineering structures. HYDROGEOLOGY Hydrogeology is a scientific field engaged in groundwaters, their origin, conditions of incidence, laws of movement, their regimes, physical and chemical properties, their interaction with rocks, surface water and atmosphere. Hydrogeology ranges among applied geological branches and has closest relation to engineering geology. Modern hydrogeology has the character of a cross-border scientific discipline at the margin between geology, hydraulics, hydrology, chemistry and several technological disciplines (water management, civil engineering, chemical technology of water treatment etc.).A necessary method of modern hydrogeology is the development and use of mathematical models simulating natural processes as well as artificial interventions in the regime of waters both in saturated and unsaturated zones. The contents of the hydrogeology of today is moving from simple searching for water resources to the determination of optimum conditions of their utilization and protection. Hydrogeology plays an irreplacable role in the field of the protection of the living environment, in research and remediation of contaminated soils, rocks and groundwater. APPLIED GEOPHYSICS Applied geophysics studies physical fields and their utilization in solving geological problems. The main interest is in the upper part of the Earth s crust in the depth range of the first meters to first kilometers. The basic methods of applied geophysics are: gravity methods, magnetic methods, seismic methods, geoelectrical methods, radioactivity methods, geothermal methods and well logging. Geophysical methods are applied for investigation and exploration of mineral deposits, building materials, water resources, energy resources and are significant in monitoring and protection of natural environment. Description of the entrance examination and evaluation criteria The entrance examination has one round and is held as an interview. In exceptional cases, requested in writing by 30 April 2017, the dean can permit entrance examinations to take place via information and communication technology. During the entrance examination the candidate must demonstrate technical and linguistic skills to study the given field along with attributes necessary for scientific work. The entrance examination also takes into account the interest of the candidate in pursuing specific doctoral work with a particular supervisor and the candidate’s ability to handle this topic. The maximum score of the examination is 100 points. Conditions for admission Submission of a properly completed application, including prescribed appendices, and payment of the application fee by 30 April 2017. Completion of a master’s program of study at a university documented by a notarized copy of a diploma or certificate of equivalence of a foreign university education, or an original confirmation of completion of the required education by 30 September 2017. The requirement of submitting a notarized copy of a diploma does not apply to master’s graduates of Charles University. Applicants whose request for recognition of a foreign education has not been decided upon by 30 September 2017 may submit the required document by 21 October 2017. Passing grade on the entrance examination All applicants scoring at least 50 points on the entrance examination will be admitted for study. Information on the exercise of graduates A graduate of the Applied Geology Ph.D. program has acquired deep knowledge in the field of engineering geology focused on theoretical and experimental soil and rock mechanics as well as geotechnical mathematical modelling, in the field of hydrogeology focused on the use and protection of ground water resources, in the field of applied geophysics with special interest on mathematical models of physical fields, in the field of economic geology focused on the genesis of raw mineral material deposits including prospecting, exploration and evaluation as well as the problems of the reclamation of abandoned mines, and in the field of environmental geology and geochemistry. [-]

PhD in Physics of Nanostructures

Charles University Faculty of Mathematics and Physics
Campus Part time 4 years September 2017 Czech Republic Prague

The graduate of the PhD study branch Physics of nanostructures will be competent in the field of physical properties of various types of low-dimensional structures in semiconductor, metallic, and dielectric materials, as well as biological nanostructures. [+]

Best Part time Doctorate Studies in Engineering in Czech Republic. Subject entrance examination The subject entrance examination takes the form of a discussion about the chosen study programme and the intended doctoral thesis topic. The committee judges the applicant's interest in the field, motivation, expertise, and overall readiness for doctoral studies. The level of knowledge expected is that required for passing the state final examination of the corresponding master's study programme and branch at Charles University. The applicant must demonstrate his/her insight into the basic areas of science relevant to the chosen thesis topic. The committee also takes into account documents submitted with the application, namely the statement by the proposed advisor, by the head of the proposed training department, recommendation letters, CV, and the letter of motivation. Language entrance examination The language entrance examination verifies that you have an adequate command of the English language, i.e. at least at level B2 of the Common European Framework of Reference for Languages (CEFR). Conditions for admission Admission for studies You will be admitted for studies if you have completed a Master degree programme, successfully pass (or get a waiver of) the subject and language entrance examination, and if an advisor in the required study programme is available. Information on the exercise of graduates The graduate of the PhD study branch Physics of nanostructures will be competent in the field of physical properties of various types of low-dimensional structures in semiconductor, metallic, and dielectric materials, as well as biological nanostructures. According to the subject of the PhD thesis, he/she will be an expert in the preparation and growth of various types of nanostructures and in the application of physical methods for their characterization and diagnostics. The graduates can practice in basic physical, chemical or bio-physical research, in an applied material research (new metallic, semiconductor and dielectric materials), in sensorics, in the catalysis research, nanofluidics, in the research of micro- and nanomechanic systems, as well as in industrial nanotechnology. [-]

PhD in Appli­cations of Natural Sciences

Czech Technical University in Prague
Campus Part time 4 years October 2017 Czech Republic Prague

The Faculty is a dynamic scientific and research centre working in the border areas between modern science and its applications in engineering. Its laboratories are equipped with several large research facilities, such as the VR-1 training nuclear reactor, the scanning electron microscope, high power laser systems, etc. [+]

Doctoral Degree Programmes Mathematical Engineering Physical Engineering Nuclear Engineering Nuclear Chemistry Radiological Physics Science and Research FNSPE consists of ten departments (Mathematics, Physics, Languages, Solid State Engineering, Physical Electronics, Materials, Nuclear Chemistry, Dosimetry and Application of Ionizing Radiation, Nuclear Reactors, Software Engineering in Economy), several laboratories (Training Nuclear Reactor, Computational, Radiochemical, …), the Central Faculty Library with an Audio-Visual Section, Central Workshop and other services. The Academic staff, both teachers and scientists, number about 120 and the supporting staff 100. As a rule, the scientific and research staff are engaged in teaching, especially supervising the students' research projects and giving special courses. The Faculty is a dynamic scientific and research centre working in the border areas between modern science and its applications in engineering. Its laboratories are equipped with several large research facilities, such as the VR-1 training nuclear reactor, the scanning electron microscope, high power laser systems, etc. In 2005, about 110 research projects were in progress. Scientists from the Faculty are invited to present papers at conferences worldwide and they are also involved in or directly supported by grants from the U.S.A, Germany, United Kingdom, France, the European Community, and Russia. More than 20 universities and international scientific institutions cooperate with or support research at the Faculty. The best doctoral students have been awarded scholarships at universities abroad. The Faculty research staff are also engaged in teaching and especially in supervising student research projects, which form a part of the departments’ research. Due to the training received, the graduates possess good skills in various experimental techniques and computer modelling, and their theoretical and methodical background is broad enough for versatile careers in research, engineering, informatics, management, etc. [-]

PhD in Elec­trical Engineering and Information Technology

Czech Technical University in Prague
Campus Part time 4 years October 2017 Czech Republic Prague

A Doctoral Study Programme (DSP) is the highest education available, aimed at further education of excellent holders of a Master Degree. [+]

Best Part time Doctorate Studies in Engineering in Czech Republic. Fields of Study Acoustics Electric Machines, Apparatus and Drives Electric Power Engineering Electronics Electrotechnology and Materials Plasma Physics Information Sciences and Computer Enginering Mathematical Engineering Measurement and Instrumentation Air Traffic Control Radioelectronics Control Engineering and Robotics Business Management and Economics Telecommunication Engineering Electrical Engineering Theory Artificial Intelligence and Biocybernetics Essential Information about Doctoral Studies A Doctoral Study Programme (DSP) is the highest education available, aimed at further education of excellent holders of a Master Degree. Study in the Doctoral Study Programme Doctoral study at CTU in Prague is pursuant to act No.111/1998 Coll., in accordance with Study and Examination Code for Students of the Czech Technical University in Prague, Rules of Doctoral Study at the CTU in Prague, Admission Procedures and Conditions of Study for Foreigners and the guidelines of individual faculties and institutes. A doctoral study programme at the Faculty of Electrical Engineering is divided into 16 branches of study. To be eligible for admission to doctoral study, applicants must hold a master degree (not a bachelor degree) in the same discipline or a related field. Admission to the programme is at the discretion of the Dean of the Faculty on the basis of the results of the selection procedure. Experience in the chosen field is not a condition of admission, and there are no age restrictions. Students in their final year of studies may also apply, their admission is conditional on graduation. Citizens of the Czech Republic, foreigners and persons without nationality, who are legally resident in the Czech Republic, may study in the doctoral programme. Applicants who are admitted to doctoral study become doctoral students of the FEE. The goal of doctoral study is to prepare graduates for scientific work. By attaining higher qualifications, including knowledge of foreign languages, Ph.D. graduates will significantly increase their career opportunities. A Ph.D. programme at the FEE is carried out through full-time and combined (part-time) forms of study. Full-time study at the FEE CTU generally takes 3 years for students enrolled before 1. 3. 2007 and 4 years for students enrolled after 1.3.2007, while combined form of study generally takes 5 years, with the option of interrupting the studies. Transfer between combined study and full-time study, or vice-versa, is possible on the basis of a recommendation by the Supervisor and a written statement from the doctoral student to the Dean of the Faculty. The Supervisor is appointed by the Dean. Supervisors are professors, associate professors (docents), or distinguished scholars. It is possible, with the agreement of the Supervisor and the appropriate Branch Board, to complete the study programme in a shorter time. Doctoral students studying at CTU are, for the duration of their studies, classified as regular tertiary students, with all associated rights and responsibilities. In both full-time and combined forms of study, doctoral students must submit their doctoral thesis within 7 years of the commencement of their studies. The studies take place according to an individual study plan, which designates the time allocated to study, specialised and scientific activities with plans for the development of the doctoral thesis, study at other workplaces (which may be outside the Czech Republic), designated minimum teaching duties, dates of examinations for courses taken, and other responsibilities. The individual study plan is specified by the Supervisor, after the doctoral student has expressed his/her agreement with it. Fulfilment of the coursework component (a study block) of the individual plan is completed by passing the prescribed examinations and by presenting and defending a specialised study (written report) on the current state of the subject in the world. It also comprises presentation of student's research work to scientific community. After successful termination of the study block, having passed the exam in English, it is possible to apply for the final comprehensive doctoral examination, in which the student should demonstrate his/her specialised theoretical knowledge, methods of scientific work, and the ability to acquire new scientific knowledge and to apply it creatively. This examination is conducted by the Board of Examiners for Comprehensive Doctoral Examination (Komise pro státní doktorskou zkouąku). Successful completion of this examination is a pre-requisite for the presentation and defence of the doctoral thesis. This thesis is a result of the solution of a specific scientific task; it proves the capability of a doctoral student to independently create his/her own work and must include original achievements of scientific work published by the author of the dissertation or results accepted for publication. The doctoral thesis must contain original new findings. The presentation and defence of the work is conducted by the Board for the Defence of a Doctoral Thesis (Komise pro obhajobu dizertační práce), and is open to the public. A single re-submission is allowed in the case of an unsuccessful final examination or an unsuccessful presentation and defence of the doctoral thesis. Based on the regular completion of study in a Ph.D. Programme, degree of "Doctor" (abbreviated to "Ph.D.") is obtained from The Czech Technical University in Prague. Doctoral studies can be prematurely ended by the student, on the basis of a written application. In the case of long-term neglect of responsibilities, the studies can be ended by a decision of the Dean or the Director of the institute. [-]