PhD Program in Engineering Studies in England in United Kingdom

View all PhD Programs in Engineering Studies 2018 in England in United Kingdom

Engineering Studies

A Doctor of Philosophy degree, short Ph.D is an advanced academic degree earned in various fields, signifying major interests and accomplishments in research.

Students in the field of engineering technology receive an education that draws on the distinct fields of both engineering and technology. Engineering technologists use engineering design principles in technological applications to develop technology that can be used to solve practical problems.

UK, United Kingdom is more than 300 years old and comprises four constituent nations: England, Scotland, Wales, and Northern Ireland. The UK has been a centre of learning for the past 1,000 years and possesses many ancient and distinguished universities. Foreign students make up a significant proportion of the student body at UK universities.

England is the largest of the four "home nations" that make up the United Kingdom. It is also the most populous of the four with almost 52 million inhabitants (roughly 84% of the total population of the UK).

Request Information Doctoral Programs in Engineering Studies in England in United Kingdom 2018

Read More

PhD in Information and Technology

Unicaf University (MW)
Online & Campus Combined Full time Part time Open Enrollment United Kingdom London

The goal of the PhD programme is to prepare the next generation of leading researchers. The PhD is a programme of independent, self-directed academic research degree, supported by a team of supervisors that makes an original contribution to knowledge written up in a publishable dissertation. [+]

The goal of the PhD programme is to prepare the next generation of leading researchers.

The PhD is a programme of independent, self-directed academic research degree, supported by a team of supervisors that makes an original contribution to knowledge written up in a publishable dissertation. The PhD programme also supports the development of research and generic skills to equip you to operate successfully as a professional researcher in any setting. The essential requirement of a PhD is the creation of new knowledge. Being a researcher means developing new ideas and improving understanding through the creation of new knowledge. Your research will inevitably build to some degree on the work and ideas of others, but as a research student you are expected to make an original contribution to knowledge in your discipline.... [-]


EngD in Additive Manufacturing (EPSRC Centre for Doctoral Training)

The University of Nottingham - Faculty of Engineering
Campus Full time 4 years August 2018 United Kingdom Nottingham

Discovery, understanding and innovation in Additive Manufacturing (AM) is a key element of the research strategy of both this CDT and the EPSRC Centre in AM. The overriding concerns of AM research and the broader community prioritise process control (repeatability) and the effects of (multi) material deposition – be this from a design, manufacturing or material standpoint. [+]

Research themes

Discovery, understanding and innovation in AM is a key element of the research strategy of both this CDT and the EPSRC Centre in AM. The overriding concerns of AM research and the broader community prioritise process control (repeatability) and the effects of (multi) material deposition – be this from a design, manufacturing or material standpoint. This broader research challenge not only exists to counter the lack of innovation currently afforded by current AM processes and systems but also the requirements of new multi-material AM that aims to produce graded and multi-functional components in single builds.

The CDT has identified a number of cross-cutting themes to tackle the research challenges and move towards the successful deployment and increased efficacy of AM and 3DP.... [-]


PhD Mechanical Engineering

The University of Nottingham - Faculty of Engineering
Campus Full time 3 years February 2018 United Kingdom Nottingham

PhD projects can cover many different fields within this discipline, for example thermodynamics/fluid mechanics, structural dynamics, mechanics and design. [+]

This PhD is based within the Faculty of Engineering. This provides the opportunity to undertake a PhD in a wide range of research areas and work across traditional research boundaries being part of interdisciplinary teams.

The research work within the faculty spans a range of applications including medicine, aerospace and automotive engineering, energy and the construction industry, sustainable design and development and it includes work from the most fundamental studies up to near-commercial investigations.

This course requires a 2:1 or international equivalent and/or a masters at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element).

... [-]

PhD Materials Engineering and Materials Design

The University of Nottingham - Faculty of Engineering
Campus Full time 3 years February 2018 United Kingdom Nottingham

Research involving materials processing and characterisation with a diversity of applications. MPhil/PhD projects are specialised research projects defined in conjunction with supervisors and can cover many different fields within this discipline, for example nanomaterial engineering, bioengineering, laser processing and advanced composite materials to name a few fields. [+]

This course requires a 2:1 or international equivalent and/or a masters at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element). It is usually completed over a period of around three years.

Facilities

Facilities include a range of materials-testing and characterisation techniques, including an electron microscope suite, networked computers to support computer aided design (CAD) and computer aided engineering (CAE) using industry-standard software packages; solid mechanics, thermodynamics, fluid mechanics, vibration, control, mechatronics; a full range of wind tunnels including a climatic tunnel; aero-engine test rigs and associated equipment and processes; fully automated 3D and 2D laser Doppler Anemometers and particle image velocimeters; a water jet cutting machine; high precision scales; and a welding system.... [-]


PhD Manufacturing Engineering

The University of Nottingham - Faculty of Engineering
Campus Full time 3 years February 2018 United Kingdom Nottingham

Manufacturing engineering involves the research and development of systems, processes, machines, tools and equipment. Projects areas can cover many different fields within this discipline, for example design, manufacturing, assembly, measurement, testing and modelling. [+]

Manufacturing engineering involves the research and development of systems, processes, machines, tools and equipment. Projects areas can cover many different fields within this discipline, for example design, manufacturing, assembly, measurement, testing and modelling.

This PhD is based within the Faculty of Engineering. The research work within the faculty spans a range of applications including medicine, aerospace and automotive engineering, energy and the construction industry and it includes work from the most fundamental studies up to near-commercial investigations.

This course requires a 2:1 or international equivalent and/or a masters at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element). It is usually completed over a period of three years, but is also available over four years.... [-]


PhD Human Factors

The University of Nottingham - Faculty of Engineering
Campus Full time 3 years February 2018 United Kingdom Nottingham

Human factors research focuses on the multidisciplinary research spanning studies of the interaction between humans, machines and technology to develop the products and systems that we use every day. [+]

PhD topics can cover many different fields within this discipline, for example design, manufacturing, assembly, measurement, testing and modelling.

This course requires a 2:1 or international equivalent and/or a masters at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element). It is usually completed over a period of around three years.

Facilities

Within the Human Factors Research Group (HFRG) we possess a wide range of technical facilities which are used for research and consultancy projects, as well as for teaching.The Usability and Ergonomics Laboratory constitutes a self-contained space containing a wide range of video and data capture equipment. As a result, we are able to conduct usability and ergonomics evaluation studies in which participants’ behaviour can be observed and measured in a controlled fashion.The HFRG Transport Simulation Laboratory enables our research work to be conducted in a safe, controlled and cost-effective environment. This has been of specific importance in out transport-related work, where we currently possess hi-fidelity car, motorcycle and train simulators.... [-]


PhD Environmental Engineering

The University of Nottingham - Faculty of Engineering
Campus Full time 3 years February 2018 United Kingdom Nottingham

Environmental engineering is the application of science and engineering to help improve the natural environment, seeking to facilitate the provision of healthy water, air and land. [+]

Research topics for this PhD are very varied but can include microwave processing, wastewater treatment, greenhouse gases, removal of pollutants in water and soils as well as many other aspects.

This course requires a 2:1 or international equivalent and/or a masters at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element). It is usually completed over a period of around three years.

Facilities

There are extensive laboratories with equipment from bench to pilot-plant scale. We are one of the few universities in the UK with access to mass spectroscopy, scanning electron microscopy and atomic force microscopy and a ‘virtual-reality’ suite where you can construct and optimise your own complete processing plant.... [-]


PhD Engineering Surveying and Space Geodesy

The University of Nottingham - Faculty of Engineering
Campus Full time 3 years February 2018 United Kingdom Nottingham

Engineering surveying and space geodesy is the application of science and technology for the measurement and the representation of the Earth. Research involved can cover a range of disciplines including geospatial engineering and monitoring; photogrammetry and remote sensing; the technology and applications of satellite navigation systems, such as GPS and Galileo; integrated positioning technology; environmental and atmospheric monitoring; physical and space geodesy. [+]

Research involved can cover a range of disciplines including geospatial engineering and monitoring; photogrammetry and remote sensing; the technology and applications of satellite navigation systems, such as GPS and Galileo; integrated positioning technology; environmental and atmospheric monitoring; physical and space geodesy.This PhD is based withintheNottingham Geospatial Institute(NGI).

This course requires a 2:1 or international equivalent and/or a masters at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element). It is usually completed over a period of around three years.

Facilities

NGI is a leading cross-disciplinary research and teaching institute, specialising in spatial and location-based science and engineering, using the technologies of satellite positioning, remote measurement systems and integrated sensor technologies.NGI is housed in a purpose built facility with a wide range of modern equipment, enabling access to the latest technologies and engagement with leading edge research, in for example:... [-]


PhD Electrical and Electronic Engineering

The University of Nottingham - Faculty of Engineering
Campus Full time 3 years February 2018 United Kingdom Nottingham

The Electrical and Electronic Engineering PhD brings innovation in science and technology to applications ranging from the generation and use of electrical energy (including renewable energy) to high-speed information processing and pervasive computing. [+]

Areas of research strength include biophysics, imaging and optical science, photonic engineering, power electronics, ultrasonics and electromagnetic simulation.

This course requires a 2:1 or international equivalent and/or a masters at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element).

The course is usually completed over a period of around three years, however a 42 month duration course is also available.

Facilities

The facilities in the faculty are outstanding and include a Gigahertz transverse electromagnetic cell, an RF anechoic chamber, an optical materials evaluation system lab, an RF lab, a photoluminesence lab, optics and ultrasonic labs comprising multiple optical benches, semiconductor clean rooms, power electronic module packaging facility, 270 kVA variable frequency ac supply, dynamometer testing to 800 kW and 120,000 rpm, and environmental testing including temperature, altitude, humidity and vibration.... [-]


PhD Civil Engineering

The University of Nottingham - Faculty of Engineering
Campus Full time 3 years February 2018 United Kingdom Nottingham

Civil engineering covers a wide range of subjects and The University of Nottingham is recognised for its world class learning environment and excellent facilities. [+]

Research topics within civil engineering can be based around structures, Geotechnics,fluid mechanics, transportation, GPS surveying, road materials and many other aspects.

This course requires a 2:1 or international equivalent and/or a masters at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element). It is usually completed over a period of around three years.

Facilities

There are extensive facilities available to postgraduate research students across the two research divisions including those in the Pavement Research Building, the Nottingham Geospatial Institute and the Nottingham Centre for Geomechanics.

The Pavement Research Building is a purpose-built £2.4m centre for research and development in all areas of pavement engineering; design, performance, maintenance and materials. It incorporates laboratories for testing asphalt, concrete, bitumen, aggregates, recycled and other paving materials as well as pilot-scale pavements.... [-]


PhD Chemical Engineering

The University of Nottingham - Faculty of Engineering
Campus Full time 3 years February 2018 United Kingdom Nottingham

Chemical engineering is the application of physical and life sciences, with mathematics to produce, transform, transport and effectively use chemicals, materials and energy. [+]

This course requires a 2:1 or international equivalent and/or a masters at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element). It is usually completed over a period of around three years.

Facilities

There are extensive laboratories with equipment from bench to pilot-plant scale. We are one of the few departments in the UK with access to mass spectroscopy, scanning electron microscopy and atomic force microscopy and a ‘virtual-reality’ suite where you can construct and optimise your own complete processing plant.

Postgraduate students also have access to research facilities including a range of equipment, for example:

Total organic carbon Strong acid digestion of rocks Research test rigs – multiphase flow Drop tube furnace Flow in pipe rig Microwave centre Research support ... [-]

PhD Building Technology

The University of Nottingham - Faculty of Engineering
Campus Full time 3 years February 2018 United Kingdom Nottingham

Building technology focus on the strategies and systems used in buildings to ensure the comfort and wellbeing of occupants are met in a manner that acknowledges the need to use energy and other resources in a responsible manner. [+]

Subjects covered in this area of research include:

low/zero carbon buildings eco-buildings; heat recovery systems computer modelling and building physics acoustics lighting heat transfer and 2-phase flow building services (eg heating, refrigeration, air-conditioning) indoor environmental quality (eg thermal comfort and air quality) ventillation/natural ventillation thermal modelling post occupancy evaluation biomimetics

This course requires a 2:1 or international equivalent and/or a masters at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element). It is usually completed over a period of around three years.

Facilities

Students are equipped with additional tools for investigative analysis including computer facilities (with all the software you will need), building technologies laboratories and technical workshops, a digital fabrication suite and model making workshop.... [-]


EngD Manufacturing Technology

The University of Nottingham - Faculty of Engineering
Campus Full time 4 years September 2018 United Kingdom Nottingham

The Engineering Doctorate (EngD) is an alternative to the traditional PhD. It is more closely related to the needs of industry and provides a more vocational doctorate degree. It encourages the development of innovative thinking while tackling real industrial problems. [+]

The Engineering Doctorate (EngD) is an alternative to the traditional PhD. It is more closely related to the needs of industry and provides a more vocational doctorate degree. It encourages the development of innovative thinking while tackling real industrial problems.

The four year EngD programme integrates an industry based doctoral research project with high-quality training which develop skills in core technology subject areas, research methods, project management, quality assurance, technology acquisition, supply chain management and professional development. Engineering Researchers may also spend time using the world-class facilities at the Manufacturing Technology Centre (MTC).... [-]


EngD Non-destructive Evaluation

The University of Nottingham - Faculty of Engineering
Campus Full time 4 years September 2018 United Kingdom Nottingham

The Research Centre in Nondestructive Evaluation (RCNDE) is an EPSRC-sponsored collaboration between industry and academia to coordinate research into Non-destructive evaluation (NDE) technologies, and to ensure research topics are relevant to the medium to longer-term needs of industry. [+]

The Research Centre in Nondestructive Evaluation (RCNDE) is an EPSRC-sponsored collaboration between industry and academia to coordinate research into Non-destructive evaluation (NDE) technologies, and to ensure research topics are relevant to the medium to longer-term needs of industry.

The centre is sponsored by the Engineering and Physical Sciences Research Council (EPSRC), is a collaborative venture involving, Bath, Bristol, Imperial College London, Nottingham, Strathclyde and Warwick universities as well as a range of industrial partners.

Industrial partners in the ENGd include large companies such as Airbus; NNL; BAE Systems; BP; EDF, E-ON, Network Rail; RWE; Npower; Rolls-Royce; Serco; Shell; QinetiQ; and Renishaw. There are also a similar number of smaller companies involved. Successful candidates work closely with their chosen sponsor, normally carrying out the majority of project work at that company.... [-]


Doctorate In Electrical, Electronic And Automatic Engineering

Carlos III University of Madrid
Campus Full time September 2018 United Kingdom London

This doctoral program is aimed at students wishing to extend their training and conduct their research in the lines of work offered by the three departments ... [+]

PhD in Electrical and Automation Engineering, Electronics

This doctoral program is aimed at students wishing to extend their training and conduct their research in the lines of work offered by the three departments that comprise: Department of Electrical Engineering, Department of Systems Engineering and Automation and Electronics Technology Department. These lines of work are:

Optoelectronics. Photonics. Artificial vision. Robotics. Renewable energy. Power electronics. Electricity markets. Electric and magnetic materials. Microelectronics. Automation

The PhD student intended to deepen their training in these disciplines, acquiring advanced skills and knowledge to enable it carry out research, development and innovation in any of these disciplines, to prepare and submit his doctoral thesis.... [-]