Part time PhD Degree in Engineering Studies in England in United Kingdom

See Part time PhD Programs in Engineering Studies in England United Kingdom 2018

Engineering Studies

Requirements for the PhD program often involve the student having already obtained a Master’s degree. Additionally, a thesis or dissertation primarily consisting of original academic research must be submitted. In some countries, this work may even need to be defended in front of a panel.

Students in the field of engineering technology receive an education that draws on the distinct fields of both engineering and technology. Engineering technologists use engineering design principles in technological applications to develop technology that can be used to solve practical problems.

Education in the United Kingdom is a devolved matter with each of the countries of the United Kingdom having separate systems under different governments: the UK Government is responsible for England, and the Scottish Government, the Welsh Government and the Northern Ireland Executive are responsible for Scotland, Wales and Northern Ireland, respectively.

England is the largest of the four "home nations" that make up the United Kingdom. It is also the most populous of the four with almost 52 million inhabitants (roughly 84% of the total population of the UK).

Request Information Part time Doctorate Degrees in Engineering Studies in England in United Kingdom 2018

Read More

Doctorate In Electrical, Electronic And Automatic Engineering

Carlos III University of Madrid
Campus September 2018 United Kingdom London

This doctoral program is aimed at students wishing to extend their training and conduct their research in the lines of work offered by the three departments ... [+]

PhD in Electrical and Automation Engineering, Electronics

This doctoral program is aimed at students wishing to extend their training and conduct their research in the lines of work offered by the three departments that comprise: Department of Electrical Engineering, Department of Systems Engineering and Automation and Electronics Technology Department. These lines of work are:

Optoelectronics. Photonics. Artificial vision. Robotics. Renewable energy. Power electronics. Electricity markets. Electric and magnetic materials. Microelectronics. Automation

The PhD student intended to deepen their training in these disciplines, acquiring advanced skills and knowledge to enable it carry out research, development and innovation in any of these disciplines, to prepare and submit his doctoral thesis.... [-]


EngD in Additive Manufacturing (EPSRC Centre for Doctoral Training)

The University of Nottingham - Faculty of Engineering
Campus 4 years August 2018 United Kingdom Nottingham

Discovery, understanding, and innovation in Additive Manufacturing (AM) is a key element of the research strategy of both this CDT and the EPSRC Centre in AM. The overriding concerns of AM research and the broader community prioritize process control (repeatability) and the effects of (multi) material deposition – be this from a design, manufacturing or material standpoint. [+]

Research themes

Discovery, understanding, and innovation in AM is a key element of the research strategy of both this CDT and the EPSRC Centre in AM. The overriding concerns of AM research and the broader community prioritize process control (repeatability) and the effects of (multi) material deposition – be this from a design, manufacturing or material standpoint. This broader research challenge not only exists to counter the lack of innovation currently afforded by current AM processes and systems but also the requirements of new multi-material AM that aims to produce graded and multi-functional components in single builds.

The CDT has identified a number of cross-cutting themes to tackle the research challenges and move towards the successful deployment and increased efficacy of AM and 3DP.... [-]


PhD Mechanical Engineering

The University of Nottingham - Faculty of Engineering
Campus 3 years June 2018 United Kingdom Nottingham

PhD projects can cover many different fields within this discipline, for example, thermodynamics/fluid mechanics, structural dynamics, mechanics, and design. [+]

This PhD is based on the Faculty of Engineering. This provides the opportunity to undertake a PhD in a wide range of research areas and work across traditional research boundaries being part of interdisciplinary teams.

The research work within the faculty spans a range of applications including medicine, aerospace and automotive engineering, energy and the construction industry, sustainable design and development and it includes work from the most fundamental studies up to near-commercial investigations.

This course requires a 2:1 or international equivalent and/or a master's degree at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element).

... [-]

PhD Materials Engineering and Materials Design

The University of Nottingham - Faculty of Engineering
Campus 3 years June 2018 United Kingdom Nottingham

Research involving materials processing and characterization with a diversity of applications. MPhil/ Ph.D. projects are specialized research projects defined in conjunction with supervisors and can cover many different fields within this discipline, for example, nanomaterial engineering, bioengineering, laser processing and advanced composite materials to name a few fields. [+]

This course requires a 2:1 or international equivalent and/or masters at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element). It is usually completed over a period of around three years.

Facilities

Facilities include a range of materials-testing and characterisation techniques, including an electron microscope suite, networked computers to support computer-aided design (CAD) and computer-aided engineering (CAE) using industry-standard software packages; solid mechanics, thermodynamics, fluid mechanics, vibration, control, mechatronics; a full range of wind tunnels including a climatic tunnel; aero-engine test rigs and associated equipment and processes; fully automated 3D and 2D laser Doppler Anemometers and particle image velocimeters; a water jet cutting machine; high precision scales; and a welding system.... [-]


PhD Manufacturing Engineering

The University of Nottingham - Faculty of Engineering
Campus 3 years June 2018 United Kingdom Nottingham

Manufacturing engineering involves the research and development of systems, processes, machines, tools, and equipment. Projects areas can cover many different fields within this discipline, for example, design, manufacturing, assembly, measurement, testing, and modeling. [+]

Manufacturing engineering involves the research and development of systems, processes, machines, tools, and equipment. Projects areas can cover many different fields within this discipline, for example, design, manufacturing, assembly, measurement, testing, and modeling.

This Ph.D. is based within the Faculty of Engineering. The research work within the faculty spans a range of applications including medicine, aerospace and automotive engineering, energy and the construction industry and it includes work from the most fundamental studies up to near-commercial investigations.

This course requires a 2:1 or international equivalent and/or a master at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element). It is usually completed over a period of three years but is also available over four years.... [-]


PhD Human Factors

The University of Nottingham - Faculty of Engineering
Campus 3 years June 2018 United Kingdom Nottingham

Human factors research focuses on the multidisciplinary research spanning studies of the interaction between humans, machines, and technology to develop the products and systems that we use every day. [+]

PhD topics can cover many different fields within this discipline, for example, design, manufacturing, assembly, measurement, testing, and modeling.

This course requires a 2:1 or international equivalent and/or a master's degree at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element). It is usually completed over a period of around three years.

Facilities

Within the Human Factors Research Group (HFRG) we possess a wide range of technical facilities which are used for research and consultancy projects, as well as for teaching.The Usability and Ergonomics Laboratory constitutes a self-contained space containing a wide range of video and data capture equipment. As a result, we are able to conduct usability and ergonomics evaluation studies in which participants’ behavior can be observed and measured in a controlled fashion.The HFRG Transport Simulation Laboratory enables our research work to be conducted in a safe, controlled and cost-effective environment. This has been of specific importance in out transport-related work, where we currently possess hi-fidelity car, motorcycle, and train simulators.... [-]


PhD Environmental Engineering

The University of Nottingham - Faculty of Engineering
Campus 3 years June 2018 United Kingdom Nottingham

Environmental engineering is the application of science and engineering to help improve the natural environment, seeking to facilitate the provision of healthy water, air, and land. [+]

Research topics for this PhD are very varied but can include microwave processing, wastewater treatment, greenhouse gases, removal of pollutants in water and soils as well as many other aspects.

This course requires a 2:1 or international equivalent and/or a master's degree at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element). It is usually completed over a period of around three years.

Facilities

There are extensive laboratories with equipment from bench to pilot-plant scale. We are one of the few universities in the UK with access to mass spectroscopy, scanning electron microscopy and atomic force microscopy and a ‘virtual-reality’ suite where you can construct and optimize your own complete processing plant.... [-]


PhD Electrical and Electronic Engineering

The University of Nottingham - Faculty of Engineering
Campus 3 years June 2018 United Kingdom Nottingham

The Electrical and Electronic Engineering PhD brings innovation in science and technology to applications ranging from the generation and use of electrical energy (including renewable energy) to high-speed information processing and pervasive computing. [+]

Areas of research strength include biophysics, imaging and optical science, photonic engineering, power electronics, ultrasonics and electromagnetic simulation.

This course requires a 2:1 or international equivalent and/or masters at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element).

The course is usually completed over a period of around three years, however, a 42-month duration course is also available.

Facilities

The facilities in the faculty are outstanding and include a Gigahertz transverse electromagnetic cell, an RF anechoic chamber, an optical materials evaluation system lab, an RF lab, a photoluminescence lab, optics and ultrasonic labs comprising multiple optical benches, semiconductor clean rooms, power electronic module packaging facility, 270 kVA variable frequency ac supply, dynamometer testing to 800 kW and 120,000 rpm, and environmental testing including temperature, altitude, humidity and vibration.... [-]


PhD Civil Engineering

The University of Nottingham - Faculty of Engineering
Campus 3 years June 2018 United Kingdom Nottingham

Civil engineering covers a wide range of subjects and The University of Nottingham is recognized for its world-class learning environment and excellent facilities. [+]

Research topics within civil engineering can be based on structures, Geotechnics, fluid mechanics, transportation, GPS surveying, road materials and many other aspects.

This course requires a 2:1 or international equivalent and/or a master's degree at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element). It is usually completed over a period of around three years.

Facilities

There are extensive facilities available to postgraduate research students across the two research divisions including those in the Pavement Research Building, the Nottingham Geospatial Institute and the Nottingham Centre for Geomechanics.

The Pavement Research Building is a purpose-built center for research and development in all areas of pavement engineering; design, performance, maintenance, and materials. It incorporates laboratories for testing asphalt, concrete, bitumen, aggregates, recycled and other paving materials as well as pilot-scale pavements.... [-]


PhD Chemical Engineering

The University of Nottingham - Faculty of Engineering
Campus 3 years June 2018 United Kingdom Nottingham

Chemical engineering is the application of physical and life sciences, with mathematics to produce, transform, transport and effectively use chemicals, materials, and energy. [+]

This course requires a 2:1 or international equivalent and/or a master's degree at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element). It is usually completed over a period of around three years.

Facilities

There are extensive laboratories with equipment from bench to pilot-plant scale. We are one of the few departments in the UK with access to mass spectroscopy, scanning electron microscopy and atomic force microscopy and a ‘virtual-reality’ suite where you can construct and optimize your own complete processing plant.

Postgraduate students also have access to research facilities including a range of equipment, for example:

Total organic carbon Strong acid digestion of rocks Research test rigs – multiphase flow Drop tube furnace Flow in pipe rig Microwave center Research support ... [-]

EngD Manufacturing Technology

The University of Nottingham - Faculty of Engineering
Campus 4 years September 2018 United Kingdom Nottingham

The Engineering Doctorate (EngD) is an alternative to the traditional PhD. It is more closely related to the needs of industry and provides a more vocational doctorate degree. It encourages the development of innovative thinking while tackling real industrial problems. [+]

The Engineering Doctorate (EngD) is an alternative to the traditional PhD. It is more closely related to the needs of industry and provides a more vocational doctorate degree. It encourages the development of innovative thinking while tackling real industrial problems.

The four-year EngD programme integrates an industry based doctoral research project with high-quality training which develops skills in core technology subject areas, research methods, project management, quality assurance, technology acquisition, supply chain management and professional development. Engineering Researchers may also spend time using the world-class facilities at the Manufacturing Technology Centre (MTC).... [-]


EngD Non-destructive Evaluation

The University of Nottingham - Faculty of Engineering
Campus 4 years September 2018 United Kingdom Nottingham

The Research Centre in Nondestructive Evaluation (RCNDE) is an EPSRC-sponsored collaboration between industry and academia to coordinate research into Non-destructive evaluation (NDE) technologies, and to ensure research topics are relevant to the medium to longer-term needs of industry. [+]

The Research Centre in Nondestructive Evaluation (RCNDE) is an EPSRC-sponsored collaboration between industry and academia to coordinate research into Non-destructive evaluation (NDE) technologies, and to ensure research topics are relevant to the medium to longer-term needs of industry.

The center is sponsored by the Engineering and Physical Sciences Research Council (EPSRC), is a collaborative venture involving, Bath, Bristol, Imperial College London, Nottingham, Strathclyde and Warwick universities as well as a range of industrial partners.

Industrial partners in the ENGd include large companies such as Airbus; NNL; BAE Systems; BP; EDF, E-ON, Network Rail; RWE; Npower; Rolls-Royce; Serco; Shell; QinetiQ; and Renishaw. There are also a similar number of smaller companies involved. Successful candidates work closely with their chosen sponsor, normally carrying out the majority of project work at that company.... [-]


PhD in Production and Manufacturing Engineering

London South Bank University
Campus Online & Campus Combined Part time 3 - 6 years June 2018 United Kingdom London + 1 more

The School of Engineering has a strong culture of research and enterprise. London South Bank University (LSBU) is the top modern university in London for world-leading and internationally excellent research and Grade Point Average in General Engineering -Research Excellence Framework (REF) 2014. [+]

The School of Engineering has a strong culture of research and enterprise. London South Bank University (LSBU) is the top modern university in London for world-leading and internationally excellent research and Grade Point Average in General Engineering -Research Excellence Framework (REF) 2014.

REF also awarded 80% of LSBU's research into General Engineering the two highest quality ratings (4* or 3*) for 'impact' (research and significance). Intelligent monitoring and asset management The Intelligent Monitoring and Asset Management Research Centre focuses on monitoring the condition of machines and systems; diagnosis and prognosis methods and novel asset management. The Centre’s research goals are to maximize systems availability, prevent unplanned shutdowns, optimize maintenance services, reduce overall operating costs and increase returns on investment. Core areas of expertise include: Machine condition monitoring Machine fault diagnosis and prognosis Advanced signal processing for machine applications Machinery asset management A member of staff, an expert in the chosen field, is directly responsible for guiding and supporting your research programme. As a research student, you'll become part of our thriving academic community. A Ph.D., by definition, is an original contribution to knowledge. A research degree is different from a taught course. Research students are expected to self-direct their learning with support from a supervisory team. Key course information - ordered by mode Mode Duration Start Date Location Full-time 3 years January; February; March; April; May; June; July; August; September; October; November Southwark Campus Part-time 5 years January; February; March; April; May; June; July; August; September; October; November Southwark Campus... [-]

PhD in Mechanical Engineering

London South Bank University
Campus Online & Campus Combined Part time 3 - 6 years September 2018 United Kingdom London + 1 more

London South Bank University (LSBU) is the top modern university in London for world-leading and internationally excellent research and Grade Point Average in General Engineering - Research Excellence Framework (REF) 2014. [+]

London South Bank University (LSBU) is the top modern university in London for world-leading and internationally excellent research and Grade Point Average in General Engineering - Research Excellence Framework (REF) 2014. This success is underpinned by a strong record of external income generation with the total current contract value of research and enterprise awards exceeding £4m. Income is generated from a wide range of sources including the research councils, European Union, industry, Government, charities, consultancy and Knowledge Transfer Partnerships where the School is one of the leaders nationally. Our research is to a very large degree interdisciplinary and collaborative with strong national and international links. A member of staff, an expert in the chosen field, is directly responsible for guiding and supporting your research programme. As a research student, you'll become part of our thriving academic community. A Ph.D., by definition, is an original contribution to knowledge. A research degree is different from a taught course. Research students are expected to self-direct their learning with support from a supervisory team. Key course information - ordered by mode Mode Duration Start Date Location Full-time 3 years January; February; March; April; May; September; October; November Southwark Campus Part-time 5 years January; February; March; April; May; September; October; November Southwark Campus Distance Learning 6 years January; February; March; April; May; September; October; November Southwark Campus Employability ... [-]

PhD in General Engineering

London South Bank University
Campus Online & Campus Combined Part time 3 - 6 years September 2018 United Kingdom London + 1 more

The School of Engineering has a strong culture of research and enterprise. London South Bank University (LSBU) is the top modern university in London for world-leading and internationally excellent research and Grade Point Average in General Engineering -Research Excellence Framework (REF) 2014. [+]

The School of Engineering has a strong culture of research and enterprise. London South Bank University (LSBU) is the top modern university in London for world-leading and internationally excellent research and Grade Point Average in General Engineering -Research Excellence Framework (REF) 2014.

REF also awarded 80% of LSBU's research into General Engineering the two highest quality ratings (4* or 3*) for 'impact' (research and significance).

Research areas

LSBU offers several research centers or areas you could join:

Advanced Materials Big Data and Informatics Biomedical and Communications Energy and the Environment Intelligent Monitoring and Asset Management Robotics

A member of staff, an expert in the chosen field, is directly responsible for guiding and supporting your research programme. As a research student, you'll become part of our thriving academic community.... [-]