Part time PhD Degree in Engineering and Technology in Czech Republic

Search Part time PhD Programs in Engineering and Technology in Czech Republic 2017

Engineering and Technology

The most popular doctorate is the Doctor of Philosophy or Ph.D. Ph.D.s and other study doctorates prepare graduate student to launch new plans that add to the common knowledge base of the field. Candidates for and holders of Ph.D.s often seek professions as professors and researchers, but many also go on to different roles in the charitable, public, and private sectors.

Students in the field of engineering technology receive an education that draws on the distinct fields of both engineering and technology. Engineering technologists use engineering design principles in technological applications to develop technology that can be used to solve practical problems.

Czech Republic has a well-established and research based university education. This has made learning ini Prague one of the respected curriculum's in Europe since it cultivates the spirit of creativity and innovation among students.

Contact Schools Directly Best Part time Doctorate Degrees in Engineering and Technology in Czech Republic 2017

Read More

PhD in Advanced Materials and Nanosciences

Brno University of Technology
Campus 4 years September 2017 Czech Republic Brno

This programme is based on the cooperation of two universities and one research institute - Brno University of Technology, Masaryk University and the Institute of Physics of Materials of the Academy of Sciences of the Czech Republic. [+]

Best Part time PhD Programs in Engineering and Technology in Czech Republic. Advanced Materials and Nanosciences CEITEC BUT offers you a unique inter-institutional graduate programme, which in general is based on the CEITEC project research programmes. Currently one doctoral programme is available – Advanced Materials and Nanosciences. This programme is based on the cooperation of two universities and one research institute - Brno University of Technology, Masaryk University and the Institute of Physics of Materials of the Academy of Sciences of the Czech Republic. The Advanced Materials and Nanosciences programme is composed of two fields of study: Advanced Nanotechnologies and Microtechnologies Advanced Materials Advanced Nanotechnologies and Microtechnologies About The research is focused on the area of nanotechnologies covering materials and structures to be exploited in nanoelectronic and nanophotonic applications. The research involves the preparation, characterization and analysis of the properties of nanostructures enabling active application of the principles determining the unique and specific properties of nanostructures. Attention will be paid to research into 2D – OD nanostructures produced by lithographic (top-down) methods and self-organizing (bottom-up) methods. The research will consider semiconductor nanostructures, magnetic and metallic nanostructures, nanotubes and nanofibres, supra-molecules and nano-electronic material on the edge of Moore's law, etc. Dissertation thesis topics The dissertations thesis topics proposed within the Advanced Nanotechnologies and Microtechnologies research programme correspond to the research interests and objectives of research of these research groups: Fabrication and Characterization of Nanostructures, Smart Nanodevices, Optoelectronic Characterization of Nanostructures, X-ray micro CT and nano CT, Micro and Nanotribology, Development... [-]

PhD in Physical and Material Engineering

Brno University of Technology
Campus Part time 4 years May 2017 Czech Republic Brno

The goal of the doctoral study programme is to provide outstanding graduates from the MSc study programme with a specialised university education of the highest level in certain fields of physical technologies, materials engineering and interdisciplinary parts. [+]

Physical and Material Engineering Guarantor of the programme: prof. RNDr. Miroslav Liška, DrSc. Academic year: 2017/18 Type of study: full-time Language of instructions: English Standard length of study: 4 years Qualification awarded: Ph.D. Educational and professional goals The goal of the doctoral study programme is to provide outstanding graduates from the MSc study programme with a specialised university education of the highest level in certain fields of physical technologies, materials engineering and interdisciplinary parts. The education obtained within this study programme also comprises a training and attestation for scientific work. Admission requirements and access to further studies The student must have finished a relevant field of technical science MSc study programme. The admission procedure consists of the parts from applied mathematics and physics and a discussion on a topic related to the subject of PhD study programme. Examination and assessment regulations, required practice The requirements that the doctoral students have to fulfil are given by their individual study plans, which specify the courses that they have to complete, their presupposed study visits and active participation at scientific conferences, and their minimum pedagogical activities within the BSc and MSc study programmes of the faculty. A successful completion of the doctoral studies is conditional on the following: The student has to pass a doctoral state examination within which he/she has to prove a deep knowledge of methodologies, theories, and their applications in accordance with the state of the art in the areas of science that are given by the courses included in... [-]

PhD in Manufacturing Technology

Brno University of Technology
Campus 4 years September 2017 Czech Republic Brno

The goal of the doctoral study programme is to provide outstanding graduates from the MSc study programme with a specialised university education of the highest level. [+]

Best Part time PhD Programs in Engineering and Technology in Czech Republic. Manufacturing Technology Original title in Czech: Strojírenská technology Abbreviation: D4T-K Level of course unit: Doctoral Faculty: Faculty of Mechanical Engineering Academic year: 2017/2018 Title awarded: Ph.D. Qualification awarded: Ph.D. in the field "Manufacturing Technology" Level of qualification: Doctoral (3rd cycle) Accredited until: 31.12.2020 Specific admission requirements: The student must have finished a relevant field of technical science MSc study programme. The admission procedure consists of the parts from applied mathematics and physics and a discussion on a topic related to the subject of PhD study programme. Profile of the programme: The goal of the doctoral study programme is to provide outstanding graduates from the MSc study programme with a specialised university education of the highest level. The education obtained within this study programme also comprises a training and attestation for scientific work. Key learning outcomes: Doctoral study programme is dealing with manufacturing technologies mainly, such as machining, forming, welding, foundry and coatings, including automation of technological processes. It is a very advanced level of education achievable in the study course of Manufacturing Technology in the University. If the study is finished successfully, the academic title Doctor of Philosophy (PhD) is awarded. This course is designed for students with high academic ability who show an aptitude to “fast track” to Chartered Engineer status, and to senior positions within the profession. There is no selection in the specialization, but the research work belongs to the appropriate technology of production (machining,... [-]

PhD in Manufacturing Technology

Brno University of Technology
Campus Part time 4 years September 2017 Czech Republic Brno

The goal of the doctoral study programme is to provide outstanding graduates from the MSc study programme with a specialised university education of the highest level. [+]

Manufacturing Technology Original title in Czech: Strojírenská technologie Abbreviation: D4T-K Level of course unit: Doctoral Faculty: Faculty of Mechanical Engineering Academic year: 2017/2018 Title awarded: Ph.D. Qualification awarded: Ph.D. in the field "Manufacturing Technology" Level of qualification: Doctoral (3rd cycle) Accredited until: 31.12.2020 Specific admission requirements: The student must have finished a relevant field of technical science MSc study programme. The admission procedure consists of the parts from applied mathematics and physics and a discussion on a topic related to the subject of PhD study programme. Profile of the programme: The goal of the doctoral study programme is to provide outstanding graduates from the MSc study programme with a specialised university education of the highest level. The education obtained within this study programme also comprises a training and attestation for scientific work. Key learning outcomes: Doctoral study programme is dealing with manufacturing technologies mainly, such as machining, forming, welding, foundry and coatings, including automation of technological processes. It is a very advanced level of education achievable in the study course of Manufacturing Technology in the University. If the study is finished successfully, the academic title Doctor of Philosophy (PhD) is awarded. This course is designed for students with high academic ability who show an aptitude to “fast track” to Chartered Engineer status, and to senior positions within the profession. There is no selection in the specialization, but the research work belongs to the appropriate technology of production (machining, forming, welding, casting, etc). Examination regulations, assessment and grading: Examination and assessment... [-]

PhD in Machines and Equipment

Brno University of Technology
Campus 4 years September 2017 Czech Republic Brno

The goal of the doctoral study programme is to provide outstanding graduates from the MSc study programme with a specialised university education of the highest level. [+]

Best Part time PhD Programs in Engineering and Technology in Czech Republic. Machines and Equipment Abbreviation: D4Z-A Level of course unit: Doctoral Faculty: Faculty of Mechanical Engineering Academic year: 2017/2018 Title awarded: Ph.D. Qualification awarded: Ph.D. in the field "Machines and Equipment" Level of qualification: Doctoral (3rd cycle) Accredited from: 1.9.2001 Accredited until: 31.12.2020 Specific admission requirements: The student must have finished a relevant field of technical science MSc study programme. The admission procedure consists of the parts from applied mathematics and physics and a discussion on a topic related to the subject of PhD study programme. Profile of the programme: The goal of the doctoral study programme is to provide outstanding graduates from the MSc study programme with a specialised university education of the highest level. The education obtained within this study programme also comprises a training and attestation for scientific work. Examination regulations, assessment and grading: Examination and assessment regulations Graduation requirements: A specific number of ECTS credits, final state examination, doctoral thesis Mode of study: full-time study Programme supervisor: prof. Ing. Václav Píštěk, DrSc. [-]

PhD in Applied Sciences in Engineering

Brno University of Technology
Campus Part time 4 years September 2017 Czech Republic Brno

The goal of the doctoral study programme is to provide outstanding graduates from the MSc study programme with a specialised university education of the highest level in certain fields of applied sciences. [+]

Applied Sciences in Engineering Abbreviation: D4A-A Level of course unit: Doctoral Faculty: Faculty of Mechanical Engineering Academic year: 2017/2018 Title awarded: Ph.D. Qualification awarded: Ph.D. in the field "Applied Sciences in Engineering" Level of qualification: Doctoral (3rd cycle) Accredited from: 1.9.2001 Accredited until: 31.12.2020 Specific admission requirements: The student must have finished a relevant field of technical science MSc study programme. The admission procedure consists of the parts from applied mathematics and physics and a discussion on a topic related to the subject of PhD study programme. Profile of the programme: The goal of the doctoral study programme is to provide outstanding graduates from the MSc study programme with a specialised university education of the highest level in certain fields of applied sciences. The education obtained within this study programme also comprises a training and attestation for scientific work. Examination regulations, assessment and grading: Examination and assessment regulations Graduation requirements: A specific number of ECTS credits, final state examination, doctoral thesis Mode of study: full-time study Programme supervisor: prof. Ing. Jiří Burša, Ph.D. [-]

PhD in Computer Science and Engineering

Brno University of Technology
Campus Part time 4 years September 2017 Czech Republic Brno

The goal of the doctoral study programme is to provide outstanding graduates from the MSc study programme with a specialised university education of the highest level in certain fields of information technology, including especially the areas of information systems, computer-based systems and computer networks, computer graphics and multimedia, and intelligent systems. [+]

Best Part time PhD Programs in Engineering and Technology in Czech Republic. Computer Science and Engineering Abbreviation: DVI4 Programme: Computer Science and Engineering Faculty: Faculty of Information Technology Academic year: 2016/2017 Profile of the branch: The goal of the doctoral study programme is to provide outstanding graduates from the MSc study programme with a specialised university education of the highest level in certain fields of information technology, including especially the areas of information systems, computer-based systems and computer networks, computer graphics and multimedia, and intelligent systems. The education obtained within this study programme also comprises a training and attestation for scientific work. Key learning outcomes: Graduates from the doctoral study programme are trained to independently work in research, development, or management. They are able to solve and/or to lead teams solving advanced conceptual, research, development, or production problems in the area of contemporary information technology and its applications. They can be engaged to work on creative tasks, to lead research and development teams, or to work in management of companies or organizations whenever there are required abilities to work in an independent and creative way, to analyze complex problems, and to propose and realize new and original solutions. Graduates from the doctoral study programme can also teach and/or scientifically work at universities. Branch supervisor: prof. RNDr. Milan Češka, CSc. Issued topics of Doctoral Study Program: Advanced Algorithms of Computer Graphics The topic focuses algorithms of computer graphics and generally computer image synthesis. Its main goal is to research algorithms so... [-]

PhD in Electrical Engineering and Communication

Brno University of Technology
Campus 4 years September 2017 Czech Republic Brno

The doctor study programme provides the specialised university education to the graduates of the previous master study in electronics and communication technologies. [+]

Electrical Engineering and Communication Electronics and Communication branch Abbreviation: PPA-EST Length of Study: 4 years Programme: Electrical Engineering and Communication Faculty: Faculty of Electrical Engineering and Communication Academic year: 2017/2018 Accredited from: 25.7.2007 Accredited until: 31.12.2020 Profile of the branch: The doctor study programme provides the specialised university education to the graduates of the previous master study in electronics and communication technologies. The students are educated in various branches of theoretical and applied electronics and communication techniques. The students make deeper their theoretical knowledge of higher mathematics and physics, and they earn also knowledge of applied informatics and computer techniques. They get ability to produce scientific works. Key learning outcomes: The doctors are able to solve scientific and complex engineering tasks from the area of electronics and communications. Wide fundamentals and deep theoretical basis of the study program bring high adaptability and high qualification of doctors for the most of requirements of their future creative practice in all areas of electronic engineering and communications. The doctors are competent to work as scientists and researchers in many areas of basic research or research and development, as high-specialists in the development, design, construction, and application areas in many institutions, companies, and organisations of the electrical and electronic research, development, and industry as in the areas of communication and data transmission services and systems, inclusively in the special institutions of the state administration. In all of these branches they are able to work also as the leading scientific-, research-, development- or technical-managers. Occupational... [-]

PhD in Civil Engineering

Brno University of Technology
Campus 4 years September 2017 Czech Republic Brno

Abbreviation: PST; Length of Study: 4 years; Programme: Civil Engineering; Faculty: Faculty of Civil Engineering; etc. [+]

Best Part time PhD Programs in Engineering and Technology in Czech Republic. Civil Engineering Abbreviation: PST Length of Study: 4 years Programme: Civil Engineering Faculty: Faculty of Civil Engineering Academic year: 2017/2018 Accredited from: 25.7.2007 Accredited until: 31.12.2020 Branch supervisor: doc. Ing. Jiří Hirš, CSc. Issued topics of Doctoral Study Program: Building physical aspects of tubular light guides Tubular light guides are used in buildings for several decades already. They are continuously improved to meet the latest requirements, which however comes with some side effects. Like the depreciation of their characteristics, or higher price. Therefore it is advantageous to create a comprehensive overview about the building physical (economical might be possible as well) aspects of tubular light guides, which can be based on long-term monitoring and computer simulations of physical parameters. Tutor: Pěnčík Jan, doc. Ing., Ph.D. Description of the long-term behavior of thermal insulation block made from recycled composite during long term load With the possibility of the use of composites from recycled polymers, such as thermal insulation block, there is a need to describe their long-term behaviour. Description is also by contingent on the type of loading. Especially the compressive load is for this material specific. Description will be implemented using rheological models that will be derived based on the monitoring of experimental prototypes and will be verified by FEM mathematical modeling. Tutor: Pěnčík Jan, doc. Ing., Ph.D. Development of composite structures applicable in reconstruction of civil buildings As a part of the reconstruction of civil buildings is... [-]

PhD in Chemistry and Technology of Foodstuffs

Brno University of Technology
Campus Part time 4 years September 2017 Czech Republic Brno

The aim of the study is to reach the balance between theoretical and experimental skills and the application of the general procedures in chemistry and food technology. [+]

Chemistry and Technology of Foodstuffs Abbreviation: DKAP_CHTP Level of course unit: Doctoral Faculty: Faculty of Chemistry Academic year: 2017/2018 Title awarded: Ph.D. Qualification awarded: Ph.D. in the field "Chemistry and Technology of Foodstuffs" Level of qualification: Doctoral (3rd cycle) Accredited from: 21.12.2015 Accredited until: 31.5.2020 Specific admission requirements: Master degree in chemical engineering, food chemistry or other chemical specializations earned at university faculties, ICT Prague or agricultural universities. Profile of the programme: The aim of the study is to reach the balance between theoretical and experimental skills and the application of the general procedures in chemistry and food technology. The program is oriented both in food production with the emphasize to secure and develop advanced technologies, as well as in quality control and safety of food products. That is why the students will complete courses of disciplines necessary for the study. The program is oriented both to food production with the respect to the implementation and development of advanced technologies and to the control of quality and safety of food products. This corresponds with the necessary disciplines the students will complete during the course of their studies. The graduates find jobs in the university and non-university research ,in the research and development departments of private companies - both in the Czech Republic and the EU (e.g. European Food Safety Authority, DG SANCO), in the complex of agro-food plants etc. The graduate are also qualified to work in the institutions of state control and business organizations. Key learning outcomes: The PhD... [-]

PhD in Chemistry, Technology and Properties of Materials

Brno University of Technology
Campus 4 years September 2017 Czech Republic Brno

The aim of the study is to raise experts in the field of materials engineering and engineering technologies with the emphasis on chemical processes and material properties. [+]

Best Part time PhD Programs in Engineering and Technology in Czech Republic. Chemistry, Technology and Properties of Materials Abbreviation: DPAP_CHM_4 Level of course unit: Doctoral Faculty: Faculty of Chemistry Academic year: 2017/2018 Title awarded: Ph.D. Qualification awarded: Ph.D. in the field "Chemistry, Technology and Properties of Materials" Level of qualification: Doctoral (3rd cycle) Accredited from: 21.12.2015 Accredited until: 31.5.2024 Specific admission requirements: We expect knowledge of basic chemical, physical and physically-chemical concepts and principles to the extent specified for the comprehensive MA exam in chemistry, physics and physical chemistry at the Faculty of Chemistry of the Brno University of Technology, eventually at other similarly focused BUT faculties or other university faculties. Other requirements: interest in engineering and scientific work, knowledge of English and good results in the previous study (better than average grade of 2). Profile of the programme: The aim of the study is to raise experts in the field of materials engineering and engineering technologies with the emphasis on chemical processes and material properties. The study also includes the principles of testing and measuring methods that will qualify the students both for the positions of technology team supervisors in chemical plants and work in the basic and applied research, research and development institutes involved in the testing of physically-chemical characteristics of substances and also in companies focused on the production of novel , perspective materials. This is what the domestic and international internships are aimed for. The teaching load in seminars provides the doctoral students with the basic... [-]

PhD in Organic Technology

University of Chemistry and Technology, Prague
Campus Part time 4 years Open Enrollment Czech Republic Prague

Organic Technology sub-programme builds on Master sub-programmes Engineering and Technology and Applied Chemistry. The aim of the doctoral study is to prepare graduates for mangement and optimization of processes in chemical industry as well as for research and development of chemical specialties. [+]

Overview Organic Technology sub-programme builds on Master sub-programmes Engineering and Technology and Applied Chemistry. The aim of the doctoral study is to prepare graduates for mangement and optimization of processes in chemical industry as well as for research and development of chemical specialties. Therefore, this sub-programme is principally oriented at modernization of current technologies of organic substances as well as development of new ones, from basic intermediates and products that are produced in large scale to small tonnage fine chemicals, e.g. biologically active substances, fragrance and flavour substances, surfactants. Chemical transformation occurs in majority of cases in catalytic reactors and therefore requires detailed study of preparation, properties and behaviour of various homogenous and heterogenous catalysts. Students will gain theoretical and practical knowledge and experience with modern separation, optical and thermal instrumental methods, with computer simulations of reaction and separation processes, with processing of results of laboratory experiments and industrial data. The area of environmental chemistry is emphasised too, the main focus being chemical, photochemical and photocatalytic removal of undesirable organic substances from the environment. The sub-programme offers wide variety of dissertation theses– from significantly experimentally oriented to those focused on mathematical modelling, computer simulation and statistical evaluation of data, but more often featuring a combination of these. Careers Graduates can find their jobs in basic and applied research focused on bulk organic technologies, special chemical technologies as well as pharmaceutical technologies, at university departments or at the Academy of Sciences, at research and technology centres in the Czech Republic and... [-]

PhD in Metallurgy

University of Chemistry and Technology, Prague
Campus Part time 4 years Open Enrollment Czech Republic Prague

The field of study is focused on various kinds of advanced metallic materials like high-strength and thermally resistant light-weight alloys and intermetallics for highly demanding applications, metallic biomaterials for permanent and temporary medical implants, nano-crystalline alloys, highly corrosion resistant materials for power and building industry, historical materials for objects of cultural heritage etc. [+]

Best Part time PhD Programs in Engineering and Technology in Czech Republic. Overview The field of study is focused on various kinds of advanced metallic materials like high-strength and thermally resistant light-weight alloys and intermetallics for highly demanding applications, metallic biomaterials for permanent and temporary medical implants, nano-crystalline alloys, highly corrosion resistant materials for power and building industry, historical materials for objects of cultural heritage etc. In addition, processes of metal recovery from wastes and advanced surface treatment processes of metallic materials improving corrosion resistance, mechanical performance and biocompatibility are studied. During the study and experimental works students obtain fundamental knowledge on the relationships between preparation of materials, their internal structure, mechanical and chemical properties. Kinetics and mechanisms of corrosion reactions, phase transformations, mechanical strengthtening processes, physical phenomena of metallic materials and chemical reactions during waste processing are studied. Students meet advanced experimental methods for preparation of novel materials and surface layers, as well as for complex characterization of their internal structure, mechanical and physical properties, corrosion behavior. Careers The graduates have comprehensive knowledge of metallic materials, metallurgical processes and technologies, corrosion processes and corrosion protection. They find employment in basic and applied research of metallic materials, metallurgy, corrosion, corrosion protection and surface treatment processes at academic institutions, universities, research and technological centres. The graduates can also find employment in materials, metallurgy, power or chemistry oriented industry at higher management positions connected with technology, research and development. Selection of recent theses Aluminium alloys with transition metals and rare earth metals... [-]

PhD in Materials Engineering

University of Chemistry and Technology, Prague
Campus Part time 4 years Open Enrollment Czech Republic Prague

Material Engineering is focused on a very complex area of research, development, preparation, processing, characterization and use of materials for various applications. This includes both the theoretical bases of material processes, particularly physics and chemistry of heterogeneous systems, kinetics of solid-state reactions and transport phenomena and the area of evaluation of functional properties of various kinds of materials for specific applications. [+]

Overview Material Engineering is focused on a very complex area of research, development, preparation, processing, characterization and use of materials for various applications. This includes both the theoretical bases of material processes, particularly physics and chemistry of heterogeneous systems, kinetics of solid-state reactions and transport phenomena and the area of evaluation of functional properties of various kinds of materials for specific applications. As for the materials applications, dissertation theses are focused primarily on materials for electronics, photonics and materials for bio-applications. Considerable attention is also paid to nanostructured materials, their preparation, properties, analyses and evaluation of toxic effects. During the study and own research work, the students obtain thorough knowledge about the preparation and properties of various kind of materials. They will meet the advanced analytical and characterization methods for study of dependence among materials composition, structure and properties of materials (including of biocompatibility), as well as the mathematical methods and models for describing the technological processes and properties of materials. Careers The graduates will find employment in basic and applied materials research at universities, academicals institutions, research or technological centres in the Czech Republic or abroad. Further on, the graduates can be also be found in materials oriented industry at higher management positions connected with research and development. Selection of recent theses Influence of Temperature on Properties of Au Nanostructures Cell´s interaction with modified polymers Surface properties of Au nanolayers on polymer and glass substrate Study of Electrophysical Anomalies of Thin Conductive and Semiconductive Layers Deposition and characterization of... [-]

PhD in Macromolecular Chemistry

University of Chemistry and Technology, Prague
Campus Part time 4 years Open Enrollment Czech Republic Prague

The field of study is concerned on synthesis of macromolecular substances and modification of natural polymeric compounds and understanding relation polymer structure - properties. During the study and research work, the students obtain knowledge about methods for polymer characterization. [+]

Best Part time PhD Programs in Engineering and Technology in Czech Republic. Overview The field of study is concerned on synthesis of macromolecular substances and modification of natural polymeric compounds and understanding relation polymer structure - properties. During the study and research work, the students obtain knowledge about methods for polymer characterization. They will adapt advanced analytical methods for polymer characterization, composition of materials as well as the mathematical method and models for description the technological processes of polymer production. Careers The graduates find employment in basic and applied research in the fields of macromolecular chemistry, processing of polymer materials, polymer recycling and pharmaceutical chemistry at universities, research institutes in the Czech Republic and abroad. Selection of recent theses Biodegradovatelné polyestery vhodné pro přípravu mikrovláken Cryogels for applications in tissue engineering Biologicky rozložitelné polymerní materiály Nové polyuretany na bázi polykarbonátu: příprava a multidisciplinární charakterizace Studium přípravy a vlastností vysoce větvených polyimidů a materiálů na jejich bázi The preparation and structural characterization of hybrid inorgano-organic polymer systems/ The develop and application of solid state NMR techniques The praperation and characterization of poly(α-amino acid)s scaffolds for tissue engineering Catalytic conversion of carbon oxides to new polymeric materials [-]