Part time PhD Program in Engineering and Technology in Prague in Czech Republic

Compare Part time PhD Programs in Engineering and Technology in Prague Czech Republic 2017

Engineering and Technology

One must accomplish two things when earning a PhD. First one must understand a particular subject thoroughly. Secondly, one must extensively in knowledge about that subject.

The field of engineering and technology involves the study of how the conceptual design focus of engineering can be utilized in technological applications. Engineering and technology students learn how to take the plans made by engineers and make them work in the real world.

The Czech Republic, is a landlocked country in Central Europe. The country is bordered by Germany to the west, Austria to the south, Slovakia to the east and Poland to the north. Its capital and largest city, with 1.3 million inhabitants, is Prague.

This is the largest city in Czech Republic, and it's one of the most important research and education centres. The many education institutions located here ensures students both local and international have a wide choice of programmes to engage in during their stay. Education is impacting this city very positively in terms of social-economic growth.

Request Information Part time Doctorate Degrees in Engineering and Technology in Prague in Czech Republic 2017

Read More

PhD in Computer Graphics and Image Analysis

Charles University Faculty of Mathematics and Physics
Campus Part time 4 years September 2017 Czech Republic Prague

PhD in Computer Graphics and Image Analysis [+]

Part time Doctorate Programs in Engineering and Technology in Prague in Czech Republic. Subject entrance examination The subject entrance examination takes the form of a discussion about the chosen study programme and the intended doctoral thesis topic. The committee judges the applicant's interest in the field, motivation, expertise, and overall readiness for doctoral studies. The level of knowledge expected is that required for passing the state final examination of the corresponding master's study programme and branch at Charles University. The applicant must demonstrate his/her insight into the basic areas of science relevant to the chosen thesis topic. The committee also takes into account documents submitted with the application, namely the statement by the proposed advisor, by the head of the proposed training department, recommendation letters, CV, and the letter of motivation. Language entrance examination The language entrance examination verifies that you have an adequate command of the English language, i.e. at least at level B2 of the Common European Framework of Reference for Languages (CEFR). Conditions for admission Admission for studies You will be admitted for studies if you have completed a Master degree programme, successfully pass (or get a waiver of) the subject and language entrance examination, and if an advisor in the required study programme is available. You need to demonstrate your English language proficiency by April 30, 2017, in exceptional cases by September 30, 2017. [-]

PhD in Software Systems

Charles University Faculty of Mathematics and Physics
Campus Part time 4 years September 2017 Czech Republic Prague

A graduate of the Software Systems doctoral study program is an expert in some of the key fields of computer science (particularly database systems, formal verification, information systems, software engineering). [+]

Subject entrance examination The subject entrance examination takes the form of a discussion about the chosen study programme and the intended doctoral thesis topic. The committee judges the applicant's interest in the field, motivation, expertise, and overall readiness for doctoral studies. The level of knowledge expected is that required for passing the state final examination of the corresponding master's study programme and branch at Charles University. The applicant must demonstrate his/her insight into the basic areas of science relevant to the chosen thesis topic. The committee also takes into account documents submitted with the application, namely the statement by the proposed advisor, by the head of the proposed training department, recommendation letters, CV, and the letter of motivation. Language entrance examination The language entrance examination verifies that you have an adequate command of the English language, i.e. at least at level B2 of the Common European Framework of Reference for Languages (CEFR). Conditions for admission Admission for studies You will be admitted for studies if you have completed a Master degree programme, successfully pass (or get a waiver of) the subject and language entrance examination, and if an advisor in the required study programme is available. Information on the exercise of graduates A graduate of the Software Systems doctoral study program is an expert in some of the key fields of computer science (particularly database systems, formal verification, information systems, software engineering). (S)he is trained to further expand this expertise through individual and team research, to apply it in practice, and to pass it on through teaching. (S)he is aware of the need for continuous adaptation and can stay on par with state of the art, as necessitated by the ever changing conditions and requirements imposed by the intense development in the subject domain. (S)he can work as a researcher in both national and international scientific institutions, as a university teacher, and as a manager or specialist in top software industry positions (as is well illustrated by the employment history of the existing program graduates). [-]

PhD in Discrete Models and Algorithms

Charles University Faculty of Mathematics and Physics
Campus Part time 4 years September 2017 Czech Republic Prague

The aim of study is to obtain knowledge and experience in scientific and reseach work in a wide range of topic in discrete mathematics and theoretical computer science: algebraic, geometric, probabilistic, and structural methods according to the current trends in both theory and applications in physics, biology, etc. [+]

Part time Doctorate Programs in Engineering and Technology in Prague in Czech Republic. Subject entrance examination The subject entrance examination takes the form of a discussion about the chosen study programme and the intended doctoral thesis topic. The committee judges the applicant's interest in the field, motivation, expertise, and overall readiness for doctoral studies. The level of knowledge expected is that required for passing the state final examination of the corresponding master's study programme and branch at Charles University. The applicant must demonstrate his/her insight into the basic areas of science relevant to the chosen thesis topic. The committee also takes into account documents submitted with the application, namely the statement by the proposed advisor, by the head of the proposed training department, recommendation letters, CV, and the letter of motivation. Language entrance examination The language entrance examination verifies that you have an adequate command of the English language, i.e. at least at level B2 of the Common European Framework of Reference for Languages (CEFR). Conditions for admission Admission for studies You will be admitted for studies if you have completed a Master degree programme, successfully pass (or get a waiver of) the subject and language entrance examination, and if an advisor in the required study programme is available. Information on the exercise of graduates The aim of study is to obtain knowledge and experience in scientific and reseach work in a wide range of topic in discrete mathematics and theoretical computer science: algebraic, geometric, probabilistic, and structural methods according to the current trends in both theory and applications in physics, biology, etc. The graduate of this program is able to perform research and other qualified tasks, and also to supervise research in these areas. [-]

PhD in Theoretical Computer Science

Charles University Faculty of Mathematics and Physics
Campus Part time 4 years September 2017 Czech Republic Prague

A PhD. graduate in the field of Theoretical Informatics has knowledge in all important areas of theoretical computer science. He/she can use it competently in both individual and team work in important branches of IT. [+]

Subject entrance examination The subject entrance examination takes the form of a discussion about the chosen study programme and the intended doctoral thesis topic. The committee judges the applicant's interest in the field, motivation, expertise, and overall readiness for doctoral studies. The level of knowledge expected is that required for passing the state final examination of the corresponding master's study programme and branch at Charles University. The applicant must demonstrate his/her insight into the basic areas of science relevant to the chosen thesis topic. The committee also takes into account documents submitted with the application, namely the statement by the proposed advisor, by the head of the proposed training department, recommendation letters, CV, and the letter of motivation. Language entrance examination The language entrance examination verifies that you have an adequate command of the English language, i.e. at least at level B2 of the Common European Framework of Reference for Languages (CEFR). Conditions for admission Admission for studies You will be admitted for studies if you have completed a Master degree programme, successfully pass (or get a waiver of) the subject and language entrance examination, and if an advisor in the required study programme is available. Information on the exercise of graduates A PhD. graduate in the field of Theoretical Informatics has knowledge in all important areas of theoretical computer science. He/she can use it competently in both individual and team work in important branches of IT. She is capable of communicating his/her expert knowledge to other members of the team. He/she has the knowledge and skills for a systematic gathering, critical processing, and application of ideas and information which are necessary for solving new complex problems (both theoretical and applied) and for software development. He/she is capable to keep up with the development of his/her field. He/she finds jobs in Research&Development institutions and on universities worldwide, and in IT companies in research, development, expert and manager positions. [-]

PhD in Physics of Nanostructures

Charles University Faculty of Mathematics and Physics
Campus Part time 4 years September 2017 Czech Republic Prague

The graduate of the PhD study branch Physics of nanostructures will be competent in the field of physical properties of various types of low-dimensional structures in semiconductor, metallic, and dielectric materials, as well as biological nanostructures. [+]

Part time Doctorate Programs in Engineering and Technology in Prague in Czech Republic. Subject entrance examination The subject entrance examination takes the form of a discussion about the chosen study programme and the intended doctoral thesis topic. The committee judges the applicant's interest in the field, motivation, expertise, and overall readiness for doctoral studies. The level of knowledge expected is that required for passing the state final examination of the corresponding master's study programme and branch at Charles University. The applicant must demonstrate his/her insight into the basic areas of science relevant to the chosen thesis topic. The committee also takes into account documents submitted with the application, namely the statement by the proposed advisor, by the head of the proposed training department, recommendation letters, CV, and the letter of motivation. Language entrance examination The language entrance examination verifies that you have an adequate command of the English language, i.e. at least at level B2 of the Common European Framework of Reference for Languages (CEFR). Conditions for admission Admission for studies You will be admitted for studies if you have completed a Master degree programme, successfully pass (or get a waiver of) the subject and language entrance examination, and if an advisor in the required study programme is available. Information on the exercise of graduates The graduate of the PhD study branch Physics of nanostructures will be competent in the field of physical properties of various types of low-dimensional structures in semiconductor, metallic, and dielectric materials, as well as biological nanostructures. According to the subject of the PhD thesis, he/she will be an expert in the preparation and growth of various types of nanostructures and in the application of physical methods for their characterization and diagnostics. The graduates can practice in basic physical, chemical or bio-physical research, in an applied material research (new metallic, semiconductor and dielectric materials), in sensorics, in the catalysis research, nanofluidics, in the research of micro- and nanomechanic systems, as well as in industrial nanotechnology. [-]

PhD in Mathematical and Computer Modelling

Charles University Faculty of Mathematics and Physics
Campus Part time 4 years September 2017 Czech Republic Prague

This diploma holder has completed the program of combined mathematics and physics, focused on modeling in physics of solids, liquids, gasses, and plasmas. In accord with the doctoral thesis topic, he/she was devoted to continual, particle, or hybrid modeling, with emphasis either in mathematics or in physics. [+]

Subject entrance examination The subject entrance examination takes the form of a discussion about the chosen study programme and the intended doctoral thesis topic. The committee judges the applicant's interest in the field, motivation, expertise, and overall readiness for doctoral studies. The level of knowledge expected is that required for passing the state final examination of the corresponding master's study programme and branch at Charles University. The applicant must demonstrate his/her insight into the basic areas of science relevant to the chosen thesis topic. The committee also takes into account documents submitted with the application, namely the statement by the proposed advisor, by the head of the proposed training department, recommendation letters, CV, and the letter of motivation. Language entrance examination The language entrance examination verifies that you have an adequate command of the English language, i.e. at least at level B2 of the Common European Framework of Reference for Languages (CEFR). Conditions for admission Admission for studies You will be admitted for studies if you have completed a Master degree programme, successfully pass (or get a waiver of) the subject and language entrance examination, and if an advisor in the required study programme is available. Information on the exercise of graduates This diploma holder has completed the program of combined mathematics and physics, focused on modeling in physics of solids, liquids, gasses, and plasmas. In accord with the doctoral thesis topic, he/she was devoted to continual, particle, or hybrid modeling, with emphasis either in mathematics or in physics. Continual modeling in this program is focused on the mechanics and thermodynamics of fluids or solids and on mathematical and numerical analysis and solution of the corresponding systems of partial differential equations. Particle and hybrid modeling is devoted to the study of macromolecules, thin films, surfaces, and plasmas. Alumni from this program exhibit solid knowledge of mathematics, physics, and computational methods, are flexible, and possess ability to formulate, analyze, and solve numerically real-world problems. [-]

PhD in Scientific and Technical Calculations

Charles University Faculty of Mathematics and Physics
Campus Part time 4 years September 2017 Czech Republic Prague

The field is related to mathematical modelling namely, it procures a correct problem approximation and numerical solution on a computer. Therefore, computational mathematics has broad practical applications in natural and technological sciences, and also in economics, banking, medicine, etc. [+]

Part time Doctorate Programs in Engineering and Technology in Prague in Czech Republic. Subject entrance examination The subject entrance examination takes the form of a discussion about the chosen study programme and the intended doctoral thesis topic. The committee judges the applicant's interest in the field, motivation, expertise, and overall readiness for doctoral studies. The level of knowledge expected is that required for passing the state final examination of the corresponding master's study programme and branch at Charles University. The applicant must demonstrate his/her insight into the basic areas of science relevant to the chosen thesis topic. The committee also takes into account documents submitted with the application, namely the statement by the proposed advisor, by the head of the proposed training department, recommendation letters, CV, and the letter of motivation. Language entrance examination The language entrance examination verifies that you have an adequate command of the English language, i.e. at least at level B2 of the Common European Framework of Reference for Languages (CEFR). Conditions for admission Admission for studies You will be admitted for studies if you have completed a Master degree programme, successfully pass (or get a waiver of) the subject and language entrance examination, and if an advisor in the required study programme is available. Information on the exercise of graduates Computational mathematics involves mathematical research in areas of science where computing plays a central and essential role, emphasizing algorithms and numerical methods. The field is related to mathematical modelling namely, it procures a correct problem approximation and numerical solution on a computer. Therefore, computational mathematics has broad practical applications in natural and technological sciences, and also in economics, banking, medicine, etc. The curriculum provides thorough know-how on both numerical and applied mathematics, and also programming skills in computer modelling, simulation and control. Prospective employment: Fundamental and applied research, academic career, industry, economics. [-]

PhD in General Questions of Mathematics and Information Science

Charles University Faculty of Mathematics and Physics
Campus Part time 4 years September 2017 Czech Republic Prague

PhD studies are aimed at secondary teachers graduated in mathematics or information science as a teaching subject and at university teachers of mathematics, information science or didactics of these subjects. [+]

Subject entrance examination The subject entrance examination takes the form of a discussion about the chosen study programme and the intended doctoral thesis topic. The committee judges the applicant's interest in the field, motivation, expertise, and overall readiness for doctoral studies. The level of knowledge expected is that required for passing the state final examination of the corresponding master's study programme and branch at Charles University. The applicant must demonstrate his/her insight into the basic areas of science relevant to the chosen thesis topic. The committee also takes into account documents submitted with the application, namely the statement by the proposed advisor, by the head of the proposed training department, recommendation letters, CV, and the letter of motivation. Language entrance examination The language entrance examination verifies that you have an adequate command of the English language, i.e. at least at level B2 of the Common European Framework of Reference for Languages (CEFR). Conditions for admission Admission for studies You will be admitted for studies if you have completed a Master degree programme, successfully pass (or get a waiver of) the subject and language entrance examination, and if an advisor in the required study programme is available. Information on the exercise of graduates PhD studies are aimed at secondary teachers graduated in mathematics or information science as a teaching subject and at university teachers of mathematics, information science or didactics of these subjects.The main aim is to prepare good mathematicians or information scientists with a deep knowledge of the fields immediately related to their work and with the broad general orientation in the present textbooks, the modern mathematical methods, the history of mathematics as well as in the development of teaching mathematics. The attention is paid to the preparation of teachers qualified for the teaching work in general and for working with the talented students in particular, who will be able to write teaching textbooks, including a methodological commentary and analysis of difficult issues. [-]

PhD in Organic Technology

University of Chemistry and Technology, Prague
Campus Part time 4 years Open Enrollment Czech Republic Prague

Organic Technology sub-programme builds on Master sub-programmes Engineering and Technology and Applied Chemistry. The aim of the doctoral study is to prepare graduates for mangement and optimization of processes in chemical industry as well as for research and development of chemical specialties. [+]

Part time Doctorate Programs in Engineering and Technology in Prague in Czech Republic. Overview Organic Technology sub-programme builds on Master sub-programmes Engineering and Technology and Applied Chemistry. The aim of the doctoral study is to prepare graduates for mangement and optimization of processes in chemical industry as well as for research and development of chemical specialties. Therefore, this sub-programme is principally oriented at modernization of current technologies of organic substances as well as development of new ones, from basic intermediates and products that are produced in large scale to small tonnage fine chemicals, e.g. biologically active substances, fragrance and flavour substances, surfactants. Chemical transformation occurs in majority of cases in catalytic reactors and therefore requires detailed study of preparation, properties and behaviour of various homogenous and heterogenous catalysts. Students will gain theoretical and practical knowledge and experience with modern separation, optical and thermal instrumental methods, with computer simulations of reaction and separation processes, with processing of results of laboratory experiments and industrial data. The area of environmental chemistry is emphasised too, the main focus being chemical, photochemical and photocatalytic removal of undesirable organic substances from the environment. The sub-programme offers wide variety of dissertation theses– from significantly experimentally oriented to those focused on mathematical modelling, computer simulation and statistical evaluation of data, but more often featuring a combination of these. Careers Graduates can find their jobs in basic and applied research focused on bulk organic technologies, special chemical technologies as well as pharmaceutical technologies, at university departments or at the Academy of Sciences, at research and technology centres in the Czech Republic and abroad. Moreover, the graduates may become useful members of laboratory teams in research institutes and industrial businesses or hold senior management positions related to research and development. Selection of recent theses Synthesis and properties of novel 10-ring zeolites for catalytic applications Photocatalytic processes to remove of undesirable substances from conteminated water Study of metathesis reactions catalyzed by methyltrioxorhenium Carbosilane dendrimers with titanium cyclopentadienyl complexes on periphery Průtočné mikroreaktory pro přípravu chemických specialit Separation of Liquid Mixtures by Pervaporation with Supported Ionic Liquid Membranes Preparation of metal oxide nanoparticles for thin layers Kinetic models of individual hydrocarbons pyrolysis using automated reaction networks generation Kinetics of acid fats and oils transesterification reaction for biodiesel production Microstructure and transport properties of porous solids and mixed-matrix membranes [-]

PhD in Metallurgy

University of Chemistry and Technology, Prague
Campus Part time 4 years Open Enrollment Czech Republic Prague

The field of study is focused on various kinds of advanced metallic materials like high-strength and thermally resistant light-weight alloys and intermetallics for highly demanding applications, metallic biomaterials for permanent and temporary medical implants, nano-crystalline alloys, highly corrosion resistant materials for power and building industry, historical materials for objects of cultural heritage etc. [+]

Overview The field of study is focused on various kinds of advanced metallic materials like high-strength and thermally resistant light-weight alloys and intermetallics for highly demanding applications, metallic biomaterials for permanent and temporary medical implants, nano-crystalline alloys, highly corrosion resistant materials for power and building industry, historical materials for objects of cultural heritage etc. In addition, processes of metal recovery from wastes and advanced surface treatment processes of metallic materials improving corrosion resistance, mechanical performance and biocompatibility are studied. During the study and experimental works students obtain fundamental knowledge on the relationships between preparation of materials, their internal structure, mechanical and chemical properties. Kinetics and mechanisms of corrosion reactions, phase transformations, mechanical strengthtening processes, physical phenomena of metallic materials and chemical reactions during waste processing are studied. Students meet advanced experimental methods for preparation of novel materials and surface layers, as well as for complex characterization of their internal structure, mechanical and physical properties, corrosion behavior. Careers The graduates have comprehensive knowledge of metallic materials, metallurgical processes and technologies, corrosion processes and corrosion protection. They find employment in basic and applied research of metallic materials, metallurgy, corrosion, corrosion protection and surface treatment processes at academic institutions, universities, research and technological centres. The graduates can also find employment in materials, metallurgy, power or chemistry oriented industry at higher management positions connected with technology, research and development. Selection of recent theses Aluminium alloys with transition metals and rare earth metals prepared by powder metallurgy Influence of materials parameters on corrosion resistance of steels Fe-Cr in environments with enhanced oxidation ability Corrosion behaviour of titanium alloys for dentistry Properties of metallic biomaterials prepared by powder metallurgical techniques Development of aluminium-based diffusion coatings for application in waste incineration plants and biomass boilers Metallic materials with extremely fine structure: characterization of structure of// magnesium single crystals deformed by equal channel angular pressing Properties of magnesium-based alloys for hydrogen storage Cathodic Passivation of Steel Structure and properties of magnesium alloys based on Mg–Zn–Ca Preparation of electroless Ni-P coatings on light metal alloys [-]

PhD in Materials Engineering

University of Chemistry and Technology, Prague
Campus Part time 4 years Open Enrollment Czech Republic Prague

Material Engineering is focused on a very complex area of research, development, preparation, processing, characterization and use of materials for various applications. This includes both the theoretical bases of material processes, particularly physics and chemistry of heterogeneous systems, kinetics of solid-state reactions and transport phenomena and the area of evaluation of functional properties of various kinds of materials for specific applications. [+]

Part time Doctorate Programs in Engineering and Technology in Prague in Czech Republic. Overview Material Engineering is focused on a very complex area of research, development, preparation, processing, characterization and use of materials for various applications. This includes both the theoretical bases of material processes, particularly physics and chemistry of heterogeneous systems, kinetics of solid-state reactions and transport phenomena and the area of evaluation of functional properties of various kinds of materials for specific applications. As for the materials applications, dissertation theses are focused primarily on materials for electronics, photonics and materials for bio-applications. Considerable attention is also paid to nanostructured materials, their preparation, properties, analyses and evaluation of toxic effects. During the study and own research work, the students obtain thorough knowledge about the preparation and properties of various kind of materials. They will meet the advanced analytical and characterization methods for study of dependence among materials composition, structure and properties of materials (including of biocompatibility), as well as the mathematical methods and models for describing the technological processes and properties of materials. Careers The graduates will find employment in basic and applied materials research at universities, academicals institutions, research or technological centres in the Czech Republic or abroad. Further on, the graduates can be also be found in materials oriented industry at higher management positions connected with research and development. Selection of recent theses Influence of Temperature on Properties of Au Nanostructures Cell´s interaction with modified polymers Surface properties of Au nanolayers on polymer and glass substrate Study of Electrophysical Anomalies of Thin Conductive and Semiconductive Layers Deposition and characterization of carbon layers Ohmic contacts on SiC with limited reactivity Nanostructuring of solid substrate surface [-]

PhD in Macromolecular Chemistry

University of Chemistry and Technology, Prague
Campus Part time 4 years Open Enrollment Czech Republic Prague

The field of study is concerned on synthesis of macromolecular substances and modification of natural polymeric compounds and understanding relation polymer structure - properties. During the study and research work, the students obtain knowledge about methods for polymer characterization. [+]

Overview The field of study is concerned on synthesis of macromolecular substances and modification of natural polymeric compounds and understanding relation polymer structure - properties. During the study and research work, the students obtain knowledge about methods for polymer characterization. They will adapt advanced analytical methods for polymer characterization, composition of materials as well as the mathematical method and models for description the technological processes of polymer production. Careers The graduates find employment in basic and applied research in the fields of macromolecular chemistry, processing of polymer materials, polymer recycling and pharmaceutical chemistry at universities, research institutes in the Czech Republic and abroad. Selection of recent theses Biodegradovatelné polyestery vhodné pro přípravu mikrovláken Cryogels for applications in tissue engineering Biologicky rozložitelné polymerní materiály Nové polyuretany na bázi polykarbonátu: příprava a multidisciplinární charakterizace Studium přípravy a vlastností vysoce větvených polyimidů a materiálů na jejich bázi The preparation and structural characterization of hybrid inorgano-organic polymer systems/ The develop and application of solid state NMR techniques The praperation and characterization of poly(α-amino acid)s scaffolds for tissue engineering Catalytic conversion of carbon oxides to new polymeric materials [-]

PhD in Inorganic Chemistry

University of Chemistry and Technology, Prague
Campus Part time 4 years Open Enrollment Czech Republic Prague

The field of study of Inorganic chemistry is focused on the synthesis of advanced inorganic compounds and materials and studying the relationship between their chemical composition, structure and physico-chemical properties using a variety of instrumental characterization methods and theoretical tools. [+]

Part time Doctorate Programs in Engineering and Technology in Prague in Czech Republic. Overview The field of study of Inorganic chemistry is focused on the synthesis of advanced inorganic compounds and materials and studying the relationship between their chemical composition, structure and physico-chemical properties using a variety of instrumental characterization methods and theoretical tools. Based on this knowledge it is possible to design synthesis routes targeted on special inorganic materials and coordination compounds with predefined physical, electrochemical, catalytic and biochemical properties. With a focus on structural chemistry, material research and biocoordination chemistry this field of study has an interdisciplinary character ranging from physics and physical chemistry to biochemistry. The acquired knowledge and skills can vary according to the particular thesis topic from preparative and analytical chemistry to quantum chemistry and other theoretical approaches used for the description of molecular or crystalline structure. Careers The graduate will acquire theoretical knowledge and skills in advanced inorganic chemistry, in particular in the description of chemical bonding, thermodynamic stability and electrochemical properties of inorganic substances, which form a basis for many important technical applications such as nanoelectronics or catalysis but also for the role of chemical elements in biochemical systems. Apart form the theoreical knowledge the students are educated to adopt practical skills in structure analysis ans physico-chemical characterization of inorganic materials and coordination compounds. The graduates find the positions in fundamental and applied research focused on advanced inorganic materials, the materials for electronics and photonics in particular. These positions range from universities, research institutes and applied research laboratories in industrial companies, but also higher management positions in goverment, industry, research and development. Selection of recent theses Optically active ytterbium garnets films for waveguiding applications Spectroscopic and electrochemical properties of transition metal complexes and their interpretation using quantum-chemical methods Phase Equilibria in Ca-Co-O and Bi-Sr-Co-O Systems Involving Thermoelectric Mixed Oxides ZnO based dilute magnetic semiconductors - synthesis, characterization and phase relations study in Zn-Mn-O system Study of properties of superconducting materials Semiconductor materials based on nitrides and oxides [-]

PhD in Food Technology

University of Chemistry and Technology, Prague
Campus Part time 4 years Open Enrollment Czech Republic Prague

The main aim of the doctoral program is to prepare graduates with the ability of independent creative work and deep knowledge in the field of food technology and other related subjects. [+]

Overview The main aim of the doctoral program is to prepare graduates with the ability of independent creative work and deep knowledge in the field of food technology and other related subjects. The study is focused on the scientific and research work in technological processes and is based on comprehensive knowledge of the chemical, biological, engineering and economic disciplines, and the knowledge of thesolution of the specific complex problems of chosen food branches (cereal, baker and sugar technology, dairy and fat technology, meat and meat products technology, technology of fruit and vegetables, technology of surfactants and detergants and cosmetics). Careers Graduates are able to work in science and research or directly in the food industry, as well as in the related fields like cosmetics and chemical industry, including the processing of waste and protection of the environment. They may hold management positions in development, production, control and projection in commercial firms or state institutions. Due to the broad concept of expertise the graduates are ready not only for professional action in their specialization, but also for the adaptation for possible application in other technical and scientific fields. Selection of recent theses Preparation and characterisation of sorbents based on modified polysaccharides Functional properties of whey proteins Trends in food packaging: packaging with antimicrobial activity and hygienic aspects of use of plasticizers based on epoxidized soybean oil Radical and pericyclic reactions in fats and oils under high temperatures Assessment of Authenticity of Vinegar and Canned Products Containing Vinegar Selected factors affecting safety of foodstuffs and dishes Fractionation of major whey proteins Causes and prevention of defects of food products Preparation of polysaccharide derivatives with application significance Structural analysis of polysaccharides of medicinal wood-decay mushrooms [-]

PhD in Environmental Chemistry and Technology

University of Chemistry and Technology, Prague
Campus Part time 4 years Open Enrollment Czech Republic Prague

The aim of the Ph.D. study program is to train experts with deep knowledge of environmental and related chemical and biochemical disciplines, informatics and mathematical modeling. [+]

Part time Doctorate Programs in Engineering and Technology in Prague in Czech Republic. Overview The aim of the Ph.D. study program is to train experts with deep knowledge of environmental and related chemical and biochemical disciplines, informatics and mathematical modeling. Ph.D. studies build on this foundation and deepen knowledge in wide scale of environmental areas such as: analytical methods for monitoring the of water and air quality and soil contamination; technologies for drinking water production, wastewater treatment; sludge treatment, solid waste management and soil decontamination technologies; removal of air pollutants. An important part of the study is also the prevention of all forms of waste, recycling and recovery as renewable resources. Students are trained in solution of complex research projects. Careers Alumni are employed in research, training, design and other institutions, in environmental departments of public administration from local level up to ministries. They can work as well as managers and technologists of companies operating water and energy infrastructure and in industrial plants. Selection of recent theses Carbon dioxide removal from flue gas Use of membrane separation processes for the treatment of landfill leachates Testing of anaerobic biodegradability of organic compounds Possibilities and Limits of In-situ Chemical Oxidation Aimed at Hardly Remediateable Sites Environmental impacts assessment of remediation using LCA method Reactivity of nano-scale zero-valent iron for in situ remediation of chlorinated ethylenes Application of membrane technologies for waste water reuse Phosphorus removal from wastewater and its recovery in the form of struvite Use of membrane separation processes for production of drinking water from surface water sources The inhibition of microorganisms through the use of phthalocyanine compounds in cooling water [-]