Part time PhD Program in Engineering in England in United Kingdom

Find Part time PhD Programs in Engineering in England United Kingdom 2017/2018

Engineering

A PhD, also known as a Doctor of Philosophy degree, is a doctorate awarded by a university to the academic who has met all necessary qualifications and can now be considered a doctor in his or her academic field.

You can only be in a position to solve advanced engineering problems if you have PhD training in engineering. To be admitted as a doctoral student, one must hold a masters degree in the Engineering or related subject and pass a comprehensive entrance exam.

Education in the United Kingdom is a devolved matter with each of the countries of the United Kingdom having separate systems under different governments: the UK Government is responsible for England, and the Scottish Government, the Welsh Government and the Northern Ireland Executive are responsible for Scotland, Wales and Northern Ireland, respectively.

England is the largest of the four "home nations" that make up the United Kingdom. It is also the most populous of the four with almost 52 million inhabitants (roughly 84% of the total population of the UK).

Request Information Part time Doctorate Degrees in Engineering in England in United Kingdom 2017/2018

Read More

PhD Mechanical Engineering

The University of Nottingham - Faculty of Engineering
Campus 3 years December 2017 United Kingdom Nottingham

PhD projects can cover many different fields within this discipline, for example thermodynamics/fluid mechanics, structural dynamics, mechanics and design. [+]

This PhD is based within the Faculty of Engineering. This provides the opportunity to undertake a PhD in a wide range of research areas and work across traditional research boundaries being part of interdisciplinary teams.

The research work within the faculty spans a range of applications including medicine, aerospace and automotive engineering, energy and the construction industry, sustainable design and development and it includes work from the most fundamental studies up to near-commercial investigations.

This course requires a 2:1 or international equivalent and/or a masters at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element).

... [-]

PhD Materials Engineering and Materials Design

The University of Nottingham - Faculty of Engineering
Campus 3 years December 2017 United Kingdom Nottingham

Research involving materials processing and characterisation with a diversity of applications. MPhil/PhD projects are specialised research projects defined in conjunction with supervisors and can cover many different fields within this discipline, for example nanomaterial engineering, bioengineering, laser processing and advanced composite materials to name a few fields. [+]

This course requires a 2:1 or international equivalent and/or a masters at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element). It is usually completed over a period of around three years.

Facilities

Facilities include a range of materials-testing and characterisation techniques, including an electron microscope suite, networked computers to support computer aided design (CAD) and computer aided engineering (CAE) using industry-standard software packages; solid mechanics, thermodynamics, fluid mechanics, vibration, control, mechatronics; a full range of wind tunnels including a climatic tunnel; aero-engine test rigs and associated equipment and processes; fully automated 3D and 2D laser Doppler Anemometers and particle image velocimeters; a water jet cutting machine; high precision scales; and a welding system.... [-]


PhD Manufacturing Engineering

The University of Nottingham - Faculty of Engineering
Campus 3 years December 2017 United Kingdom Nottingham

Manufacturing engineering involves the research and development of systems, processes, machines, tools and equipment. Projects areas can cover many different fields within this discipline, for example design, manufacturing, assembly, measurement, testing and modelling. [+]

Manufacturing engineering involves the research and development of systems, processes, machines, tools and equipment. Projects areas can cover many different fields within this discipline, for example design, manufacturing, assembly, measurement, testing and modelling.

This PhD is based within the Faculty of Engineering. The research work within the faculty spans a range of applications including medicine, aerospace and automotive engineering, energy and the construction industry and it includes work from the most fundamental studies up to near-commercial investigations.

This course requires a 2:1 or international equivalent and/or a masters at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element). It is usually completed over a period of three years, but is also available over four years.... [-]


PhD Engineering Surveying and Space Geodesy

The University of Nottingham - Faculty of Engineering
Campus 3 years December 2017 United Kingdom Nottingham

Engineering surveying and space geodesy is the application of science and technology for the measurement and the representation of the Earth. Research involved can cover a range of disciplines including geospatial engineering and monitoring; photogrammetry and remote sensing; the technology and applications of satellite navigation systems, such as GPS and Galileo; integrated positioning technology; environmental and atmospheric monitoring; physical and space geodesy. [+]

Research involved can cover a range of disciplines including geospatial engineering and monitoring; photogrammetry and remote sensing; the technology and applications of satellite navigation systems, such as GPS and Galileo; integrated positioning technology; environmental and atmospheric monitoring; physical and space geodesy. This PhD is based within the Nottingham Geospatial Institute (NGI).

This course requires a 2:1 or international equivalent and/or a masters at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element). It is usually completed over a period of around three years.

Facilities

NGI is a leading cross-disciplinary research and teaching institute, specialising in spatial and location-based science and engineering, using the technologies of satellite positioning, remote measurement systems and integrated sensor technologies. NGI is housed in a purpose built facility with a wide range of modern equipment, enabling access to the latest technologies and engagement with leading edge research, in for example:... [-]


PhD Civil Engineering

The University of Nottingham - Faculty of Engineering
Campus 3 years December 2017 United Kingdom Nottingham

Civil engineering covers a wide range of subjects and The University of Nottingham is recognised for its world class learning environment and excellent facilities. [+]

Research topics within civil engineering can be based around structures, Geotechnics,fluid mechanics, transportation, GPS surveying, road materials and many other aspects. 

This course requires a 2:1 or international equivalent and/or a masters at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element). It is usually completed over a period of around three years.

Facilities

There are extensive facilities available to postgraduate research students across the two research divisions including those in the Pavement Research Building, the Nottingham Geospatial Institute and the Nottingham Centre for Geomechanics.

The Pavement Research Building is a purpose-built £2.4m centre for research and development in all areas of pavement engineering; design, performance, maintenance and materials. It incorporates laboratories for testing asphalt, concrete, bitumen, aggregates, recycled and other paving materials as well as pilot-scale pavements.... [-]


PhD Chemical Engineering

The University of Nottingham - Faculty of Engineering
Campus 3 years December 2017 United Kingdom Nottingham

Chemical engineering is the application of physical and life sciences, with mathematics to produce, transform, transport and effectively use chemicals, materials and energy. [+]

This course requires a 2:1 or international equivalent and/or a masters at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element). It is usually completed over a period of around three years.

Facilities

There are extensive laboratories with equipment from bench to pilot-plant scale. We are one of the few departments in the UK with access to mass spectroscopy, scanning electron microscopy and atomic force microscopy and a ‘virtual-reality’ suite where you can construct and optimise your own complete processing plant. 

Postgraduate students also have access to research facilities including a range of equipment, for example:

Total organic carbon  Strong acid digestion of rocks Research test rigs – multiphase flow  Drop tube furnace  Flow in pipe rig  Microwave centre Research support ... [-]

PhD Building Technology

The University of Nottingham - Faculty of Engineering
Campus 3 years December 2017 United Kingdom Nottingham

Building technology focus on the strategies and systems used in buildings to ensure the comfort and wellbeing of occupants are met in a manner that acknowledges the need to use energy and other resources in a responsible manner. [+]

Subjects covered in this area of research include:

low/zero carbon buildings eco-buildings; heat recovery systems computer modelling and building physics acoustics lighting heat transfer and 2-phase flow building services (eg heating, refrigeration, air-conditioning) indoor environmental quality (eg thermal comfort and air quality) ventillation/natural ventillation thermal modelling post occupancy evaluation biomimetics

This course requires a 2:1 or international equivalent and/or a masters at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element). It is usually completed over a period of around three years.

Facilities

Students are equipped with additional tools for investigative analysis including computer facilities (with all the software you will need), building technologies laboratories and technical workshops, a digital fabrication suite and model making workshop.... [-]


EngD Manufacturing Technology

The University of Nottingham - Faculty of Engineering
Campus 4 years September 2018 United Kingdom Nottingham

The Engineering Doctorate (EngD) is an alternative to the traditional PhD. It is more closely related to the needs of industry and provides a more vocational doctorate degree. It encourages the development of innovative thinking while tackling real industrial problems. [+]

The Engineering Doctorate (EngD) is an alternative to the traditional PhD. It is more closely related to the needs of industry and provides a more vocational doctorate degree. It encourages the development of innovative thinking while tackling real industrial problems.

The four year EngD programme integrates an industry based doctoral research project with high-quality training which develop skills in core technology subject areas, research methods, project management, quality assurance, technology acquisition, supply chain management and professional development. Engineering Researchers may also spend time using the world-class facilities at the Manufacturing Technology Centre (MTC).... [-]


EngD Carbon Capture and Storage and Cleaner Fossil Energy

The University of Nottingham - Faculty of Engineering
Campus 4 years August 2018 United Kingdom Nottingham

This course is aimed at graduate engineering students who will become a new kind of engineer increasingly in demand by today’s industry; an engineer who is aware of the social, ethical and environmental implications of their design and construction decisions. [+]

The Engineering and Physical Sciences Research Council (EPSRC) and Medical Research Council (MRC) have provided funding for 15 studentships and produce research leaders who will tackle the major challenges in generating electricity more efficiently using fossil energy.

This course is aimed at graduate engineering students who will become a new kind of engineer increasingly in demand by today’s industry; an engineer who is aware of the social, ethical and environmental implications of their design and construction decisions. The EngD training provides:

an in-depth four-year training programme for those who satisfy the UK residency requirements, a non-taxed stipend of up to £18,363 p.a for EU and International students - Home/EU fees and a basic stipend approximately three years' extensive research time in close collaboration with industry partners Entry requirements ... [-]

EngD Non-destructive Evaluation

The University of Nottingham - Faculty of Engineering
Campus 4 years September 2018 United Kingdom Nottingham

The Research Centre in Nondestructive Evaluation (RCNDE) is an EPSRC-sponsored collaboration between industry and academia to coordinate research into Non-destructive evaluation (NDE) technologies, and to ensure research topics are relevant to the medium to longer-term needs of industry. [+]

The Research Centre in Nondestructive Evaluation (RCNDE) is an EPSRC-sponsored collaboration between industry and academia to coordinate research into Non-destructive evaluation (NDE) technologies, and to ensure research topics are relevant to the medium to longer-term needs of industry.

The centre is sponsored by the Engineering and Physical Sciences Research Council (EPSRC), is a collaborative venture involving, Bath, Bristol, Imperial College London, Nottingham, Strathclyde and Warwick universities as well as a range of industrial partners.

Industrial partners in the ENGd include large companies such as Airbus; NNL; BAE Systems; BP; EDF, E-ON, Network Rail; RWE; Npower; Rolls-Royce; Serco; Shell; QinetiQ; and Renishaw. There are also a similar number of smaller companies involved. Successful candidates work closely with their chosen sponsor, normally carrying out the majority of project work at that company.... [-]


PhD in Engineering, Product Design and Textiles specialisms

University of Bolton
Campus 3 - 7 years August 2018 United Kingdom Bolton

The doctor of philosophy (PhD) degree is aimed at students with a masters degree in a relevant field, in addition to a good honours degree (or significant work experience and professional qualifications), who wish to undertake a research-based doctorate. On the PhD programme you are expected to demonstrate the creation and interpretation of new knowledge through original research, or other advanced scholarship of a quality to satisfy peer review, which... [+]

Part time Doctoral Degrees in Engineering in England in United Kingdom. Engineering, Product Design and Textiles specialisms - PhD The doctor of philosophy (PhD) degree is aimed at students with a masters degree in a relevant field, in addition to a good honours degree (or significant work experience and professional qualifications), who wish to undertake a research-based doctorate. On the PhD programme you are expected to demonstrate the creation and interpretation of new knowledge through original research, or other advanced scholarship of a quality to satisfy peer review, which extends the forefront of the discipline and merits publication. You will also be expected to acquire an understanding of a substantial body of knowledge in your particular subject area in the field of engineering or design, as well as a general ability to conceptualise, design and implement a project for the generation of new knowledge. You will also gain a detailed understanding of applicable techniques for research and advanced academic enquiry in the engineering or design subject area. If you wish to develop research and analytical skills and conduct an original piece of research this course is appropriate for you. Your research may be applied research or action research, and may be based on your work in industry if you choose to study part-time. Careers & professional development Recent graduates from the PhD programme are following careers in academia and industry. On graduation you will become a member of the University's alumni association. You will be a lifelong member of the... [-]