Part time Doctor of Philosophy in Mechanical Engineering in Czech Republic

Search Part time PhD Programs in Mechanical Engineering in Czech Republic 2017

Mechanical Engineering

Earning a Ph.D. requires extended study and intense mental effort. A PhD is an academic study on which you concentrate for four to six years after obtaining your master’s degree, and that leads, if successful, to a PhD degree, the highest academic degree.

A PhD in Mechanical Engineering helps you understand the concepts in engineering better hence enabling you to give solutions to complex mechanical problems. Through this training, you can provide advisory services to mechanical engineering companies especially in different mechanical problems.

The Czech Republic, is a landlocked country in Central Europe. The country is bordered by Germany to the west, Austria to the south, Slovakia to the east and Poland to the north. Its capital and largest city, with 1.3 million inhabitants, is Prague.

Contact Schools Best Part time Doctorate Degrees in Mechanical Engineering in Czech Republic 2017

Read More

PhD in Physical and Material Engineering

Brno University of Technology
Campus Part time 4 years May 2017 Czech Republic Brno

The goal of the doctoral study programme is to provide outstanding graduates from the MSc study programme with a specialised university education of the highest level in certain fields of physical technologies, materials engineering and interdisciplinary parts. [+]

Best Part time PhD Programs in Mechanical Engineering in Czech Republic. Physical and Material Engineering Guarantor of the programme: prof. RNDr. Miroslav Liška, DrSc. Academic year: 2017/18 Type of study: full-time Language of instructions: English Standard length of study: 4 years Qualification awarded: Ph.D. Educational and professional goals The goal of the doctoral study programme is to provide outstanding graduates from the MSc study programme with a specialised university education of the highest level in certain fields of physical technologies, materials engineering and interdisciplinary parts. The education obtained within this study programme also comprises a training and attestation for scientific work. Admission requirements and access to further studies The student must have finished a relevant field of technical science MSc study programme. The admission procedure consists of the parts from applied mathematics and physics and a discussion on a topic related to the subject of PhD study programme. Examination and assessment regulations, required practice The requirements that the doctoral students have to fulfil are given by their individual study plans, which specify the courses that they have to complete, their presupposed study visits and active participation at scientific conferences, and their minimum pedagogical activities within the BSc and MSc study programmes of the faculty. A successful completion of the doctoral studies is conditional on the following: The student has to pass a doctoral state examination within which he/she has to prove a deep knowledge of methodologies, theories, and their applications in accordance with the state of the art in the... [-]

PhD in Manufacturing Technology

Brno University of Technology
Campus 4 years September 2017 Czech Republic Brno

The goal of the doctoral study programme is to provide outstanding graduates from the MSc study programme with a specialised university education of the highest level. [+]

Manufacturing Technology Original title in Czech: Strojírenská technology Abbreviation: D4T-K Level of course unit: Doctoral Faculty: Faculty of Mechanical Engineering Academic year: 2017/2018 Title awarded: Ph.D. Qualification awarded: Ph.D. in the field "Manufacturing Technology" Level of qualification: Doctoral (3rd cycle) Accredited until: 31.12.2020 Specific admission requirements: The student must have finished a relevant field of technical science MSc study programme. The admission procedure consists of the parts from applied mathematics and physics and a discussion on a topic related to the subject of PhD study programme. Profile of the programme: The goal of the doctoral study programme is to provide outstanding graduates from the MSc study programme with a specialised university education of the highest level. The education obtained within this study programme also comprises a training and attestation for scientific work. Key learning outcomes: Doctoral study programme is dealing with manufacturing technologies mainly, such as machining, forming, welding, foundry and coatings, including automation of technological processes. It is a very advanced level of education achievable in the study course of Manufacturing Technology in the University. If the study is finished successfully, the academic title Doctor of Philosophy (PhD) is awarded. This course is designed for students with high academic ability who show an aptitude to “fast track” to Chartered Engineer status, and to senior positions within the profession. There is no selection in the specialization, but the research work belongs to the appropriate technology of production (machining, forming, welding, casting, etc). Examination regulations, assessment and grading: Examination and assessment... [-]

PhD in Manufacturing Technology

Brno University of Technology
Campus Part time 4 years September 2017 Czech Republic Brno

The goal of the doctoral study programme is to provide outstanding graduates from the MSc study programme with a specialised university education of the highest level. [+]

Best Part time PhD Programs in Mechanical Engineering in Czech Republic. Manufacturing Technology Original title in Czech: Strojírenská technologie Abbreviation: D4T-K Level of course unit: Doctoral Faculty: Faculty of Mechanical Engineering Academic year: 2017/2018 Title awarded: Ph.D. Qualification awarded: Ph.D. in the field "Manufacturing Technology" Level of qualification: Doctoral (3rd cycle) Accredited until: 31.12.2020 Specific admission requirements: The student must have finished a relevant field of technical science MSc study programme. The admission procedure consists of the parts from applied mathematics and physics and a discussion on a topic related to the subject of PhD study programme. Profile of the programme: The goal of the doctoral study programme is to provide outstanding graduates from the MSc study programme with a specialised university education of the highest level. The education obtained within this study programme also comprises a training and attestation for scientific work. Key learning outcomes: Doctoral study programme is dealing with manufacturing technologies mainly, such as machining, forming, welding, foundry and coatings, including automation of technological processes. It is a very advanced level of education achievable in the study course of Manufacturing Technology in the University. If the study is finished successfully, the academic title Doctor of Philosophy (PhD) is awarded. This course is designed for students with high academic ability who show an aptitude to “fast track” to Chartered Engineer status, and to senior positions within the profession. There is no selection in the specialization, but the research work belongs to the appropriate technology of production (machining, forming,... [-]

PhD in Machines and Equipment

Brno University of Technology
Campus 4 years September 2017 Czech Republic Brno

The goal of the doctoral study programme is to provide outstanding graduates from the MSc study programme with a specialised university education of the highest level. [+]

Machines and Equipment Abbreviation: D4Z-A Level of course unit: Doctoral Faculty: Faculty of Mechanical Engineering Academic year: 2017/2018 Title awarded: Ph.D. Qualification awarded: Ph.D. in the field "Machines and Equipment" Level of qualification: Doctoral (3rd cycle) Accredited from: 1.9.2001 Accredited until: 31.12.2020 Specific admission requirements: The student must have finished a relevant field of technical science MSc study programme. The admission procedure consists of the parts from applied mathematics and physics and a discussion on a topic related to the subject of PhD study programme. Profile of the programme: The goal of the doctoral study programme is to provide outstanding graduates from the MSc study programme with a specialised university education of the highest level. The education obtained within this study programme also comprises a training and attestation for scientific work. Examination regulations, assessment and grading: Examination and assessment regulations Graduation requirements: A specific number of ECTS credits, final state examination, doctoral thesis Mode of study: full-time study Programme supervisor: prof. Ing. Václav Píštěk, DrSc. [-]

PhD in Mechanical Engineering

Czech Technical University in Prague
Campus Part time 4 years October 2017 Czech Republic Prague

The doctoral study programme is designed for Master study programme graduates. Doctoral study is a subsequent, higher and more sophisticated form of education which the Faculty of Mechanical Engineering offers in a variety of branches. Students of the Doctoral study programme are trained for solution of complex problems of applied science and industrial experience. [+]

Best Part time PhD Programs in Mechanical Engineering in Czech Republic. Fields of Study Materials engineering Machines and Equipment for Transportation Power Engineering Design and Process Engineering Manufacturing Technology Environmental Engineering Biomechanics Control and Systems Engineering Mechanics of Solids, Deformable Bodies and Continua Thermomechanics and Fluid Mechanics Mathematical and Physical Engineering Enterprise Management and Economics Doctoral Study Programme The doctoral study programme is designed for Master study programme graduates. Doctoral study is a subsequent, higher and more sophisticated form of education which the Faculty of Mechanical Engineering offers in a variety of branches. Students of the Doctoral study programme are trained for solution of complex problems of applied science and industrial experience. Study proceeds in accordance with individual curricula and is completed with a state doctoral exam and defense of a dissertation which proves the doctoral student´s competence in independent creative scientific work. The academic degree "Doctor", in abbreviated form "Ph.D." written after the name, conferred on the graduates is compatible with academic degrees conferred on analagous graduates of foreign universities. [-]