Part time Doctoral Program in East Midlands United Kingdom

View all 26 Part time PhD Programs in East Midlands United Kingdom

PhD

A Doctor of Philosophy degree, short Ph.D is an advanced academic degree earned in various fields, signifying major interests and accomplishments in research.

A PhD is awarded after a student completes required coursework and research in his or her specified area of study. Offered at universities all over the world, this degree often takes at least four years to complete.

UK, United Kingdom is more than 300 years old and comprises four constituent nations: England, Scotland, Wales, and Northern Ireland. The UK has been a centre of learning for the past 1,000 years and possesses many ancient and distinguished universities. Foreign students make up a significant proportion of the student body at UK universities.

Request Information Part time Doctoral Programs in East Midlands in United Kingdom 2017/2018

Read More

PhD Sociology and Social Policy

University of Nottingham - Faculty of Social Sciences
Campus Part time 3 - 6 years September 2018 United Kingdom Nottingham

Committed to teaching and research excellence, the School of Sociology and Social Policy is a dynamic centre for collaborative and interdisciplinary PhD study. [+]

Research overview

Committed to teaching and research excellence, the School of Sociology and Social Policy is a dynamic centre for collaborative and interdisciplinary PhD study.

A PhD is the most advanced form of postgraduate study. It is awarded on the successful completion of supervised research, verbal examination and final thesis.

We offer PhDs in:

Criminology Public policy Sociology Social policy and administration Social work Science, technology and society

"This programme combines advanced research training with high-quality supervision and feedback. You will study within a vibrant and active research community, and will be supported by two academic supervisors."... [-]


PhD Politics and International Relations

University of Nottingham - Faculty of Social Sciences
Campus Part time 3 - 6 years September 2018 United Kingdom Nottingham

Offering supervision in most subject areas, the School of Politics and International Relations is a thriving and dynamic centre for PhD study. [+]

Research overview

Offering supervision in most subject areas, the School of Politics and International Relations is a thriving and dynamic centre for PhD study.

A PhD is the most advanced form of postgraduate study. It is awarded on the successful completion of supervised research, verbal examination and final thesis.

We encourage our students to play an active role in the school's research centres and institutes as well as the activities of the school as a whole.

The school runs a weekly colloquium for postgraduate research students, giving you the opportunity to present your work in front of other research students and staff with similar research interests.

Politics and international relations research areas include:... [-]


PhD Law

University of Nottingham - Faculty of Social Sciences
Campus Part time 3 - 6  January 2018 United Kingdom Nottingham

With well-established research centres and links to leading institutions around the world, the School of Law is a dynamic centre for PhD study. [+]

Research overview

With well-established research centres and links to leading institutions around the world, the School of Law is a dynamic centre for PhD study.

A PhD is the most advanced form of postgraduate study. It is awarded on the successful completion of supervised research, verbal examination and final thesis.

In the school, we promote research excellence, recognising that high-quality legal research may take many different forms. We use a variety of research methods across our projects.

You will be assigned two supervisors who will have the appropriate expertise to support your research project. The school offers supervision in most subject areas, and for interdisciplinary projects which have a legal aspect to them.... [-]


PhD Economics

University of Nottingham - Faculty of Social Sciences
Campus 3 - 6 years September 2018 United Kingdom Nottingham

With expert supervision and additional research training, the School of Economics offers an excellent PhD programme. [+]

Research overview

With expert supervision and additional research training, the School of Economics offers an excellent PhD programme.

A PhD is the most advanced form of postgraduate study. It is awarded on the successful completion of supervised research, verbal examination and final thesis.

Our academic staff conduct world-leading research across a wide range of subjects, so we can offer expert supervision in most areas of the discipline. You will be assigned two supervisors who will help ensure smooth progress of your research work.

During your first year, you will complete taught courses in order to acquire the necessary skills and background knowledge for your research. Some are compulsory and some will be recommended by your supervisors. You will also undertake research and generic skills training, provided by the School of Economics and the Graduate School, and start work on your research.... [-]


EngD in Additive Manufacturing (EPSRC Centre for Doctoral Training)

The University of Nottingham - Faculty of Engineering
Campus 4 years August 2018 United Kingdom Nottingham

Discovery, understanding and innovation in Additive Manufacturing (AM) is a key element of the research strategy of both this CDT and the EPSRC Centre in AM. The overriding concerns of AM research and the broader community prioritise process control (repeatability) and the effects of (multi) material deposition – be this from a design, manufacturing or material standpoint. [+]

Part time PhD Programs in East Midlands United Kingdom. Research themes Discovery, understanding and innovation in AM is a key element of the research strategy of both this CDT and the EPSRC Centre in AM. The overriding concerns of AM research and the broader community prioritise process control (repeatability) and the effects of (multi) material deposition – be this from a design, manufacturing or material standpoint. This broader research challenge not only exists to counter the lack of innovation currently afforded by current AM processes and systems but also the requirements of new multi-material AM that aims to produce graded and multi-functional components in single builds. The CDT has identified a number of cross-cutting themes to tackle the research challenges and move towards the successful deployment and increased efficacy of AM and 3DP. Deposition, is an overarching challenge both in term of design, material and process capability and is core to the CDT in AM research vision. Graded is, in effect, the next stage on from deposition, whereby materials are mixed and deposited on an ever-increasing resolution in order to effect greater and more complex functionality from graded material placement. The development of graduated structures that are fully designed and understood in terms of their final properties and capabilities is a significant multidisciplinary activity. Control, will enable existing and future AM processes and systems to actively monitor and adapt the AM processes in order for them to produce the functionalised component with the correct resolution, accuracy and importantly repeatability, not... [-]

EngD in BBSRC (Biotechnology and Biological Sciences Research Council) Doctoral Training Partnership

The University of Nottingham - Faculty of Engineering
Campus 4 years October 2018 United Kingdom Nottingham

Our 4-year fully funded PhD programme offers projects aligned with the BBSRC strategic priorities in Food Security, Industrial Biotechnology and Bioenergy and world-class Bioscience (Molecules, Cells and Organisms). [+]

We offer talented graduates the opportunity to engage in the globally recognised research environment of The University of Nottingham.

Advances in the biosciences offer genuine opportunities to focus on the world-wide challenges such as food security, new sources of energy and the development of sustainable sources for chemical products.

Our training programme is fashioned to the individual needs of the student to ensure that they are equipped with the skills and experience they need to take them through their PhD journey and beyond into academic and other career opportunities.

Students on the programme will spend time in the labs on three mini-projects to give a wide variety of experience and skills before starting work on their PhD project.... [-]


PhD in Sustainable Chemistry (Doctoral Training Centre PhD, Digital Economy Centre for Doctoral Training PhD)

The University of Nottingham - Faculty of Engineering
Campus 4 years August 2018 United Kingdom Nottingham

The EPSRC CDT in Sustainable Chemistry is a four-year programme that offers fully-funded studentships to 14 students with a background in chemistry, engineering or biosciences. [+]

Part time PhD Programs in East Midlands United Kingdom. The EPSRC Centre for Doctoral Training in Sustainable Chemistry was developed in collaboration with industry and as a partnership of several disciplines, including chemistry, engineering, biosciences and business. The centre aims to provide students with first class research training as well as the technical, theoretical and entrepreneurial skills to enable them to become champions in sustainable chemistry. Programme overview The EPSRC CDT in Sustainable Chemistry is a four-year programme that offers fully-funded studentships to 14 students with a background in chemistry, engineering or biosciences. During the first year, students will develop their main research project and then work on this for the next three years. As well as academic training, students will further benefit from a professional skills programme and practical laboratory skills training. Key benefits include: innovative training approach and continuous professional development interdisciplinary exposure peer support network generous travel and consumables budget funded three-month placement in industry or another higher education institution tuition fees paid and a tax-free annual stipend of £14,296 available to UK and EU nationals Entry requirements Ideally, candidates are expected to hold at least an upper second class honours degree with a recognisable amount of chemical science content, from a four year undergraduate course (MSci, MChem, MEng, etc) or equivalent qualification. This qualification could include chemistry, chemical engineering, process engineering, food science, natural sciences, biochemistry, biotechnology, pharmacy or other first-degree topics with a directed input to the theme of sustainability and sustainable chemicals processing. Funding... [-]

PhD Sustainable Energy Technology

The University of Nottingham - Faculty of Engineering
Campus 3 years December 2017 United Kingdom Nottingham

PhD projects in the area of sustainable energy technology explore how new and renewable technologies may be harnessed at the scale of buildings and the wider built environment. [+]

Subject areas covered include:

combined heat power systems cooling technologies heat power cycles energy storage eco-cities/smart cities sustainable building materials vehicles, transport and pollution control photovoltaic thermal systems; solar energy systems (e.g. solar powered cooling); wind energy solar water desalination systems sustainable waste management and disposal clean fossil fuel and carbon capture technologies

This course requires a 2:1 or international equivalent and/or a masters at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element).

It is usually completed over a period of around three years.

Facilities

You will have access to computing facilities, complete with the software you will need, building technology laboratories and technical workshop, digital fabrication suite and model making workshop will provide you with additional tools for investigative analysis.... [-]


PhD Mechanical Engineering

The University of Nottingham - Faculty of Engineering
Campus 3 years December 2017 United Kingdom Nottingham

PhD projects can cover many different fields within this discipline, for example thermodynamics/fluid mechanics, structural dynamics, mechanics and design. [+]

This PhD is based within the Faculty of Engineering. This provides the opportunity to undertake a PhD in a wide range of research areas and work across traditional research boundaries being part of interdisciplinary teams.

The research work within the faculty spans a range of applications including medicine, aerospace and automotive engineering, energy and the construction industry, sustainable design and development and it includes work from the most fundamental studies up to near-commercial investigations.

This course requires a 2:1 or international equivalent and/or a masters at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element).

... [-]

PhD Materials Engineering and Materials Design

The University of Nottingham - Faculty of Engineering
Campus 3 years December 2017 United Kingdom Nottingham

Research involving materials processing and characterisation with a diversity of applications. MPhil/PhD projects are specialised research projects defined in conjunction with supervisors and can cover many different fields within this discipline, for example nanomaterial engineering, bioengineering, laser processing and advanced composite materials to name a few fields. [+]

This course requires a 2:1 or international equivalent and/or a masters at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element). It is usually completed over a period of around three years.

Facilities

Facilities include a range of materials-testing and characterisation techniques, including an electron microscope suite, networked computers to support computer aided design (CAD) and computer aided engineering (CAE) using industry-standard software packages; solid mechanics, thermodynamics, fluid mechanics, vibration, control, mechatronics; a full range of wind tunnels including a climatic tunnel; aero-engine test rigs and associated equipment and processes; fully automated 3D and 2D laser Doppler Anemometers and particle image velocimeters; a water jet cutting machine; high precision scales; and a welding system.... [-]


PhD Manufacturing Engineering

The University of Nottingham - Faculty of Engineering
Campus 3 years December 2017 United Kingdom Nottingham

Manufacturing engineering involves the research and development of systems, processes, machines, tools and equipment. Projects areas can cover many different fields within this discipline, for example design, manufacturing, assembly, measurement, testing and modelling. [+]

Manufacturing engineering involves the research and development of systems, processes, machines, tools and equipment. Projects areas can cover many different fields within this discipline, for example design, manufacturing, assembly, measurement, testing and modelling.

This PhD is based within the Faculty of Engineering. The research work within the faculty spans a range of applications including medicine, aerospace and automotive engineering, energy and the construction industry and it includes work from the most fundamental studies up to near-commercial investigations.

This course requires a 2:1 or international equivalent and/or a masters at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element). It is usually completed over a period of three years, but is also available over four years.... [-]


PhD Human Factors

The University of Nottingham - Faculty of Engineering
Campus 3 years December 2017 United Kingdom Nottingham

Human factors research focuses on the multidisciplinary research spanning studies of the interaction between humans, machines and technology to develop the products and systems that we use every day. [+]

PhD topics can cover many different fields within this discipline, for example design, manufacturing, assembly, measurement, testing and modelling.

This course requires a 2:1 or international equivalent and/or a masters at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element). It is usually completed over a period of around three years.

Facilities

Within the Human Factors Research Group (HFRG) we possess a wide range of technical facilities which are used for research and consultancy projects, as well as for teaching. The Usability and Ergonomics Laboratory constitutes a self-contained space containing a wide range of video and data capture equipment. As a result, we are able to conduct usability and ergonomics evaluation studies in which participants’ behaviour can be observed and measured in a controlled fashion. The HFRG Transport Simulation Laboratory enables our research work to be conducted in a safe, controlled and cost-effective environment. This has been of specific importance in out transport-related work, where we currently possess hi-fidelity car, motorcycle and train simulators.... [-]


PhD Environmental Engineering

The University of Nottingham - Faculty of Engineering
Campus 3 years December 2017 United Kingdom Nottingham

Environmental engineering is the application of science and engineering to help improve the natural environment, seeking to facilitate the provision of healthy water, air and land. [+]

Research topics for this PhD are very varied but can include microwave processing, wastewater treatment, greenhouse gases, removal of pollutants in water and soils as well as many other aspects.

This course requires a 2:1 or international equivalent and/or a masters at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element). It is usually completed over a period of around three years.

Facilities

There are extensive laboratories with equipment from bench to pilot-plant scale. We are one of the few universities in the UK with access to mass spectroscopy, scanning electron microscopy and atomic force microscopy and a ‘virtual-reality’ suite where you can construct and optimise your own complete processing plant.... [-]


PhD Engineering Surveying and Space Geodesy

The University of Nottingham - Faculty of Engineering
Campus 3 years December 2017 United Kingdom Nottingham

Engineering surveying and space geodesy is the application of science and technology for the measurement and the representation of the Earth. Research involved can cover a range of disciplines including geospatial engineering and monitoring; photogrammetry and remote sensing; the technology and applications of satellite navigation systems, such as GPS and Galileo; integrated positioning technology; environmental and atmospheric monitoring; physical and space geodesy. [+]

Research involved can cover a range of disciplines including geospatial engineering and monitoring; photogrammetry and remote sensing; the technology and applications of satellite navigation systems, such as GPS and Galileo; integrated positioning technology; environmental and atmospheric monitoring; physical and space geodesy. This PhD is based within the Nottingham Geospatial Institute (NGI).

This course requires a 2:1 or international equivalent and/or a masters at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element). It is usually completed over a period of around three years.

Facilities

NGI is a leading cross-disciplinary research and teaching institute, specialising in spatial and location-based science and engineering, using the technologies of satellite positioning, remote measurement systems and integrated sensor technologies. NGI is housed in a purpose built facility with a wide range of modern equipment, enabling access to the latest technologies and engagement with leading edge research, in for example:... [-]


PhD Electrical and Electronic Engineering

The University of Nottingham - Faculty of Engineering
Campus 3 years December 2017 United Kingdom Nottingham

The Electrical and Electronic Engineering PhD brings innovation in science and technology to applications ranging from the generation and use of electrical energy (including renewable energy) to high-speed information processing and pervasive computing. [+]

Areas of research strength include biophysics, imaging and optical science, photonic engineering, power electronics, ultrasonics and electromagnetic simulation.

This course requires a 2:1 or international equivalent and/or a masters at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element).

The course is usually completed over a period of around three years, however a 42 month duration course is also available.

Facilities

The facilities in the faculty are outstanding and include a Gigahertz transverse electromagnetic cell, an RF anechoic chamber, an optical materials evaluation system lab, an RF lab, a photoluminesence lab, optics and ultrasonic labs comprising multiple optical benches, semiconductor clean rooms, power electronic module packaging facility, 270 kVA variable frequency ac supply, dynamometer testing to 800 kW and 120,000 rpm, and environmental testing including temperature, altitude, humidity and vibration.... [-]