Doctoral Degree in Technology Innovation in United Kingdom

See PhD Programs in Technology Innovation in United Kingdom 2017/2018

Technology Innovation

A PhD is the abbreviation for Doctor of philosophy. This degree is a post graduate program delivered to a high level student researcher who has done deep research in a specific field or subject.

The field of technology innovation is dedicated to finding groundbreaking ways to apply existing and emerging technologies. Training programs often use a multidisciplinary approach to instruction, encouraging students to think creatively and develop unique ideas.

The United Kingdom of Great Britain and Northern Ireland, commonly known as the United Kingdom and Britain, is a sovereign state located off the north-western coast of continental Europe.The two most famous (and oldest) universities are Oxford and Cambridge (often referred to as Oxbridge by many Britons) England also has several other world-class institutions, including several in London (notably Imperial College, the London School of Economics, University College London and King's College London, all are part of London University)

Top Doctoral Programs in Technology Innovation in United Kingdom 2017/2018

Read More

PhD in Information and Technology

Unicaf University
Online & Campus Combined Full time Part time Open Enrollment United Kingdom London

The goal of the PhD programme is to prepare the next generation of leading researchers. The PhD is a programme of independent, self-directed academic research degree, supported by a team of supervisors that makes an original contribution to knowledge written up in a publishable dissertation. [+]

Best PhD Degrees in Technology Innovation in United Kingdom 2017/2018. The goal of the PhD programme is to prepare the next generation of leading researchers. The PhD is a programme of independent, self-directed academic research degree, supported by a team of supervisors that makes an original contribution to knowledge written up in a publishable dissertation. The PhD programme also supports the development of research and generic skills to equip you to operate successfully as a professional researcher in any setting. The essential requirement of a PhD is the creation of new knowledge. Being a researcher means developing new ideas and improving understanding through the creation of new knowledge. Your research will inevitably build to some degree on the work and ideas of others, but as a research student you are expected to make an original contribution to knowledge in your discipline. Each PhD student must take a number of online modules and also complete a dissertation. Students must defend their dissertation in a “viva voce” (spoken) examination. The viva voce examination is an intense and challenging experience, but we offer workshops and mock examinations to help our research students prepare and almost all research students who reach this stage go on to successfully complete their degree. Students can engage in research in one of the following fields of study: Marketing Management Information and Technology Education Business Administration Accounting and Finance Programme Outline Core Units UU-PhD-801 Quantitative and Qualitative Research Methods UU-PhD-802 Current Issues in Management UU-PhD-803 Leadership UU-PhD-820 Web-based Information... [-]

PhD Studentship in EPSRC Future Composites Manufacturing Hub: New manufacturing techniques for optimised fibre architectures

The University of Nottingham - Faculty of Engineering
Campus Full time 3 years October 2017 United Kingdom Nottingham

This project aims to discover new 3D textile preform architectures for high performance composite structures. Computational modelling will evaluate the utility of different textile designs within an optimisation framework, based on processing and mechanical properties, to determine the best solution for a particular application. [+]

EPSRC Future Composites Manufacturing Hub: New manufacturing techniques for optimised fibre architectures Project Description This project aims to discover new 3D textile preform architectures for high performance composite structures. Computational modelling will evaluate the utility of different textile designs within an optimisation framework, based on processing and mechanical properties, to determine the best solution for a particular application. This framework will not be constrained to architectures that can be produced using existing manufacturing technologies, such as weaving or braiding. Optimum textile preforms will be realised either by modifying existing textile processes or, where potential benefits justify, by developing entirely bespoke manufacturing technologies. Nottingham’s proprietary textile modelling software, TexGen, will be developed to produce unit cell models of non-conventional textile forms, relaxing constraints to enable groups of fibres to follow an arbitrary path in 3D space. A multi-objective optimisation framework will be developed to achieve optimum processing and mechanical properties, which will be applied to a number of case studies to identify optimum material forms. Supervisor: Prof Andrew Long Applications are invited for fully funded PhD studentships in the Composites Research Group at the University of Nottingham. There are currently 2 available positions, which are being funded by the EPSRC Future Composites Manufacturing Hub. Successful applicants will be based at Nottingham and will: Work directly with leading academics and industrial partners from the composites supply chain Have the opportunity to undertake a 3 month secondment with an industrial partner Have the opportunity to spend up to 3 months visiting one of... [-]

PhD Manufacturing Engineering

The University of Nottingham - Faculty of Engineering
Campus Full time 3 years October 2017 United Kingdom Nottingham

Manufacturing engineering involves the research and development of systems, processes, machines, tools and equipment. Projects areas can cover many different fields within this discipline, for example design, manufacturing, assembly, measurement, testing and modelling. [+]

Best PhD Degrees in Technology Innovation in United Kingdom 2017/2018. Manufacturing engineering involves the research and development of systems, processes, machines, tools and equipment. Projects areas can cover many different fields within this discipline, for example design, manufacturing, assembly, measurement, testing and modelling. This PhD is based within the Faculty of Engineering. The research work within the faculty spans a range of applications including medicine, aerospace and automotive engineering, energy and the construction industry and it includes work from the most fundamental studies up to near-commercial investigations. This course requires a 2:1 or international equivalent and/or a masters at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element). It is usually completed over a period of three years, but is also available over four years. Facilities The faculty has world-class facilities for design, manufacturing, assembly, measurement, testing and modelling as well as a proven track record in delivering high quality research, leading to numerous patents and high impact peer reviewed publications. Within the faculty we offer exceptional facilities including a six axis water jet cutting machine; precision die-sinking and wire-EDM machines; two Hermle 5 axis milling machines; 2KW, 400W and 100W fibre lasers; a Zeiss ultra precision coordinate measuring machine; an EnvisionTec Perfactory rapid prototyping machine; state-of-the-art car, motorbike and train simulators in the Human Factors Transport Simulation Laboratory and the Usability and Ergonomics Laboratory. Research support Support for Postgraduate Research students is coordinated through the Faculty Research Office. Each PhD student... [-]

PhD Human Factors

The University of Nottingham - Faculty of Engineering
Campus Full time 3 years October 2017 United Kingdom Nottingham

Human factors research focuses on the multidisciplinary research spanning studies of the interaction between humans, machines and technology to develop the products and systems that we use every day. PhD topics can cover many different fields within this discipline, for example design, manufacturing, assembly, measurement, testing and modelling. [+]

Human factors research focuses on the multidisciplinary research spanning studies of the interaction between humans, machines and technology to develop the products and systems that we use every day. PhD topics can cover many different fields within this discipline, for example design, manufacturing, assembly, measurement, testing and modelling. This course requires a 2:1 or international equivalent and/or a masters at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element). It is usually completed over a period of around three years. Facilities Within the Human Factors Research Group (HFRG) we possess a wide range of technical facilities which are used for research and consultancy projects, as well as for teaching. The Usability and Ergonomics Laboratory constitutes a self-contained space containing a wide range of video and data capture equipment. As a result, we are able to conduct usability and ergonomics evaluation studies in which participants’ behaviour can be observed and measured in a controlled fashion. The HFRG Transport Simulation Laboratory enables our research work to be conducted in a safe, controlled and cost-effective environment. This has been of specific importance in out transport-related work, where we currently possess hi-fidelity car, motorcycle and train simulators. Research support Support for Postgraduate Research students is coordinated through the Faculty Research Office. Each PhD student will have a main academic supervisor and at least one additional supervisor. Regular formal supervision meetings, usually once a month, will take place with one or both of your supervisors. We also... [-]

PhD Building Technology

The University of Nottingham - Faculty of Engineering
Campus Full time 3 years October 2017 United Kingdom Nottingham

Building technology focus on the strategies and systems used in buildings to ensure the comfort and wellbeing of occupants are met in a manner that acknowledges the need to use energy and other resources in a responsible manner. [+]

Best PhD Degrees in Technology Innovation in United Kingdom 2017/2018. Building technology focus on the strategies and systems used in buildings to ensure the comfort and wellbeing of occupants are met in a manner that acknowledges the need to use energy and other resources in a responsible manner. Subjects covered in this area of research include: low/zero carbon buildings eco-buildings; heat recovery systems computer modelling and building physics acoustics lighting heat transfer and 2-phase flow building services (eg heating, refrigeration, air-conditioning) indoor environmental quality (eg thermal comfort and air quality) ventillation/natural ventillation thermal modelling post occupancy evaluation biomimetics This course requires a 2:1 or international equivalent and/or a masters at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element). It is usually completed over a period of around three years. Facilities Students are equipped with additional tools for investigative analysis including computer facilities (with all the software you will need), building technologies laboratories and technical workshops, a digital fabrication suite and model making workshop. The Marmont Centre for renewable energy houses research laboratories that are equipped with technologies including photovoltaic panels, solar collectors, light pipes, wind turbines and ground source pump heats. The Sustainable Research Building (SRB) is designed to serve as an exemplar building, demonstrating state-of-the-art techniques for sustainable and environmentally responsible construction. You will also benefit from the use of laboratory, office, seminar and accommodation that have been configured to support a number of different heating, cooling and ventilation strategies.... [-]

EngD Manufacturing Technology

The University of Nottingham - Faculty of Engineering
Campus Full time 4 years September 2017 United Kingdom Nottingham

The Engineering Doctorate (EngD) is an alternative to the traditional PhD. It is more closely related to the needs of industry and provides a more vocational doctorate degree. It encourages the development of innovative thinking while tackling real industrial problems. [+]

The Engineering Doctorate (EngD) is an alternative to the traditional PhD. It is more closely related to the needs of industry and provides a more vocational doctorate degree. It encourages the development of innovative thinking while tackling real industrial problems. The four year EngD programme integrates an industry based doctoral research project with high-quality training which develop skills in core technology subject areas, research methods, project management, quality assurance, technology acquisition, supply chain management and professional development. Engineering Researchers may also spend time using the world-class facilities at the Manufacturing Technology Centre (MTC). The Manufacturing Technology Engineering Doctoral Centre (MTEDC) provides an intensive four-year postgraduate research programme in partnership with industry to address key challenges in advanced manufacturing engineering and transform the latest manufacturing research results into industrial technologies. MTEDC is a partnership between: The University of Nottingham Loughborough University University of Birmingham Rolls-Royce Airbus Aero Engine Controls Manufacturing Technology Centre, Ansty, near Coventry As part of the EngD you will undertake a bespoke, structured masters-level taught programme, and work on a strategic industrial research project with the industrial partner. Facilities The MTC is based in Ansty, near Coventry. It is a world-class facility with cutting-edge equipment and expertise to bridge the gap between research and industrial application. Research Engineers on the MTEDC will have access to pre-production demonstrators to test and validate research before it goes into commercial production. The purpose-built 12,000m2 facility was established with £40.5million grant from the UK regional development agencies with additional support from key... [-]

EngD Non-destructive Evaluation

The University of Nottingham - Faculty of Engineering
Campus Full time 4 years September 2017 United Kingdom Nottingham

The Research Centre in Nondestructive Evaluation (RCNDE) is an EPSRC-sponsored collaboration between industry and academia to coordinate research into Non-destructive evaluation (NDE) technologies, and to ensure research topics are relevant to the medium to longer-term needs of industry. [+]

Best PhD Degrees in Technology Innovation in United Kingdom 2017/2018. The Research Centre in Nondestructive Evaluation (RCNDE) is an EPSRC-sponsored collaboration between industry and academia to coordinate research into Non-destructive evaluation (NDE) technologies, and to ensure research topics are relevant to the medium to longer-term needs of industry. The centre is sponsored by the Engineering and Physical Sciences Research Council (EPSRC), is a collaborative venture involving, Bath, Bristol, Imperial College London, Nottingham, Strathclyde and Warwick universities as well as a range of industrial partners. Industrial partners in the ENGd include large companies such as Airbus; NNL; BAE Systems; BP; EDF, E-ON, Network Rail; RWE; Npower; Rolls-Royce; Serco; Shell; QinetiQ; and Renishaw. There are also a similar number of smaller companies involved. Successful candidates work closely with their chosen sponsor, normally carrying out the majority of project work at that company. Non-Destructive evaluation (NDE) technologies are crucial to achieving greater integrity and safety performance across all aspects of engineering and is fast becoming a fully integrated part of the engineering life cycle. Research encompass a broad range of technical disciplines, and additional academic collaborations ensure gaps in technology and expertise are filled. Industrial membership is open to all organisations, and is primarily intended for industries in which NDE plays an important role for: ensuring the safety of structures, machinery and infrastructure minimising environmental risks and impacts of process plant and operations enhancing the reliability of components, equipment, systems and products The EngD is aimed at both new graduates and those who... [-]

PhD/MPhil in Materials Research and Innovation specialisms Doctor of Philosophy by Publication

University of Bolton
Campus Full time 3 - 4 years August 2018 United Kingdom Bolton

The innovative PhD by Publication will enable you to achieve the highest level of academic achievement in your subject area through the publication of your work. You will be a graduate with a strong background of study in the materials science, engineering and technology sectors and you may be working in these sectors. As a research student you will have access to the University’s resources and research expertise which will support your personal... [+]

Materials Research and Innovation specialisms Doctor of Philosophy by Publication – PhD/MPhil full-time The innovative PhD by Publication will enable you to achieve the highest level of academic achievement in your subject area through the publication of your work. You will be a graduate with a strong background of study in the materials science, engineering and technology sectors and you may be working in these sectors. As a research student you will have access to the University’s resources and research expertise which will support your personal and professional development. The key component of your submission will be the publication of three papers in recognised journals or two papers and an international patent. Your PhD submission will be a thesis made up of three sections: an introduction, in which you will outline, in detail, the key themes of your proposal; your published material; conclusions and recommendations for future work. It is expected that your published work will receive critical recognition by peers and acknowledgement that it has made a significant contribution to learning, development or manufacture in its field. Subject overview IMRI is a multi-disciplinary centre designed to cultivate research and innovation activities in collaboration with industry and other academic institutions. The institute leads the UK, and is internationally known, for its strong applied materials science and engineering applications through the development of new, designer and novel smart and multifunctional materials (fibres, films, foams and particles) at nano and micro levels, as well as associated processing technologies. There are dedicated laboratories... [-]