Page 2 of 7, part time PhD Degree in England United Kingdom

Page 2 of 7, find 93 Part time PhD Programs in England United Kingdom

Master

Requirements for the PhD program often involve the student having already obtained a Master’s degree. Additionally, a thesis or dissertation primarily consisting of original academic research must be submitted. In some countries, this work may even need to be defended in front of a panel.

Education in the United Kingdom is a devolved matter with each of the countries of the United Kingdom having separate systems under different governments: the UK Government is responsible for England, and the Scottish Government, the Welsh Government and the Northern Ireland Executive are responsible for Scotland, Wales and Northern Ireland, respectively.

England is the largest of the four "home nations" that make up the United Kingdom. It is also the most populous of the four with almost 52 million inhabitants (roughly 84% of the total population of the UK).

PhD 16-30 (out of 93). Request Information Part time Doctoral Programs in England in United Kingdom 2018

Read More

Doctorate In Electrical, Electronic And Automatic Engineering

Carlos III University of Madrid
Campus September 2018 United Kingdom London

This doctoral program is aimed at students wishing to extend their training and conduct their research in the lines of work offered by the three departments ... [+]

PhD in Electrical and Automation Engineering, Electronics

This doctoral program is aimed at students wishing to extend their training and conduct their research in the lines of work offered by the three departments that comprise: Department of Electrical Engineering, Department of Systems Engineering and Automation and Electronics Technology Department. These lines of work are:

Optoelectronics. Photonics. Artificial vision. Robotics. Renewable energy. Power electronics. Electricity markets. Electric and magnetic materials. Microelectronics. Automation

The PhD student intended to deepen their training in these disciplines, acquiring advanced skills and knowledge to enable it carry out research, development and innovation in any of these disciplines, to prepare and submit his doctoral thesis.... [-]


PhD in Economics

University of Leicester, School of Business
Campus Part time 36 - 78 months August 2018 United Kingdom Leicester

Ph.D. students complete an independent research project under the guidance of a supervisory team. The research is normally completed over a maximum period of 3 to 3.5 years (full-time) or 6 to 6.5 years (part-time). [+]

How to Apply

1. Make sure we offer Ph.D. supervision in the area in which you want to work - search our staff research interests

2. Draft a research proposal that tells us what you want to research, how you intend to do it, and why it is worth doing

3. Prepare your supporting documents - with your application you need to include proof that you meet the academic entry requirements and the English language entry requirements:

include all relevant certificates/diplomas and transcripts international applicants must provide official copies of their entire course transcripts including explanations of the mark schemes used and, where possible, an indication of their class ranking/position in class supporting documents, not in English must be provided with a certified English translation ... [-]

The Bradford PhD

University of Bradford School of Management
Campus Part time 3 - 7 years September 2018 United Kingdom Bradford

Studying a Ph.D. degree at the University of Bradford School of Management places you at the core of the university's intellectual life and at the forefront of its worldwide quest to provide future generations with the necessary flow of new business and management ideas. [+]

Pioneering research has always been at the heart of all teaching and learning at the University of Bradford School of Management. The School ranks as one of Europe's Top 60 Business Schools and is in an elite group of only 1% of business schools in the world to hold the triple accreditations of EQUIS, AMBA and AACSB, often referred to as the "Triple Crown". In the current RAE, 90% of the School's research was assessed to be of international standing.

The Bradford PhD

Studying a Ph.D. degree at the School of Management places you at the core of the University's intellectual life and at the forefront of its worldwide quest to provide future generations with the necessary flow of new management ideas. The Bradford Ph.D. allows you to conduct research under the supervision of our international, experienced, and highly committed faculty. As well as being supervised by two well-established researchers, you will take part in research training to provide you with the knowledge and skills to design and carry out rigorous research. You also have opportunities to present your work in our school's research seminars to discuss your research with fellow Ph.D. students and members of the faculty.... [-]


PHD - Doctor of Philosophy

London School of Theology
Campus Part time 3 - 6 years August 2018 United Kingdom Greater London

Undertaking doctoral research at London School of Theology provides you with the opportunity to be involved in research at the cutting edge of the theological disciplines. You will have the opportunity to furnish both the worldwide church and the academic community with expertise that will carry the best traditions of evangelical Christian scholarship into the next generation and enable you to teach at tertiary level. [+]

Assessment: Thesis of up to 100,000 words (80,000 words for students starting after January 2014) and oral examination (viva)

Why embark on a Ph.D.?

Undertaking doctoral research at London School of Theology provides you with the opportunity to be involved in research at the cutting edge of the theological disciplines. You will have the opportunity to furnish both the worldwide church and the academic community with expertise that will carry the best traditions of evangelical Christian scholarship into the next generation and enable you to teach at tertiary level.

Summary

LST offers research supervision for the Ph.D. degree in collaboration with Middlesex University, which awards the degree. A Ph.D. thesis must show the ability to test ideas and critically investigate your chosen area. You need to offer a substantial fresh discovery or analysis, to argue some new critical hypothesis, or to provide substantial new arguments for an older one. Ultimately your research must result in an independent and original contribution to knowledge, which, in principle, is worthy of publication. By the time your thesis is submitted, you should be able to show that your competence in your chosen area is comparable with that of the experts. Ph.D. candidates are expected to have the ability to interact with their primary sources in the original languages (e.g. Hebrew or Greek) as well as with secondary material in the main research languages (English, French, and German). Languages required will vary considerably according to the area of study and some may require... [-]


PhD in Plasma Physics and Nuclear Fusion

Carlos III University of Madrid
Campus September 2018 United Kingdom London

The PhD Programme in Plasma Physics and Nuclear Fusion aims to provide the students with a solid background in plasma physics and nuclear fusion, as well as in the research methods used in the field [+]

PhD in Plasma Physics and Nuclear Fusion

The PhD Programme has been awarded with a Quality distinction by the Spanish Education and Culture Ministry.

Aims

The PhD Programme in Plasma Physics and Nuclear Fusion aims to provide the students with a solid background in plasma physics and nuclear fusion, as well as in the research methods used in the field with a competent ability to evaluate results. It is also expected that students publish original contributions (including articles in scientific journals) and that they show the capacity for teamwork and the required aptitude to enhance the scientific and technological progress, within professional and academic contexts.... [-]


PhD in Business Administration and Quantitative Methods

Carlos III University of Madrid
Campus 2 - 3 years September 2018 United Kingdom London

The Ph.D. in Business Administration and Quantitative Methods is offered jointly by the Departments of Business Administration and Statistics. [+]

Ph.D. in Business Administration and Quantitative Methods

The Ph.D. in Business Administration and Quantitative Methods is offered jointly by the Departments of Business Administration and Statistics. The mission of the program is to develop leading scholars in finance, management, marketing, accounting, operations research, statistics and econometrics for careers in research and teaching at leading universities and business schools. A broad knowledge of business ensures that students fully appreciate the interdependencies and complexity of management problems. At the same time, a strong training in quantitative methods introduces them to the possibility of interdisciplinary and qualified empirical research.... [-]


NOWNano DTC: The North West Nanoscience Doctoral Training Centre

NOWNano The University of Manchester and Lancaster
Campus 4 years September 2018 United Kingdom Manchester

NowNano DTC students undertake a four-year doctoral training programme. A major aim of the DTC is to create a cohort of researchers that are able to draw [+]

NOWNano DTC: The North West Nanoscience Doctoral Training Centre

NowNano DTC students undertake a four-year doctoral training programme. A major aim of the DTC is to create a cohort of researchers that are able to draw on knowledge from a broad spectrum of sciences and to work in interdisciplinary teams. The challenge is to enable our students to understand the different languages and philosophies of disciplines as diverse as theoretical physics & astronomy and medicine.The aim of the first six months of the programme is to expose students to the full breadth of nanoscience and nanotechnology and to provide them with the skills and background knowledge that they will need during their Ph.D. projects in order to understand the diverse concepts and knowledge that they will inevitably encounter. To this end, the programme includes not only lecture courses and directed self-study (inquiry-based learning) but also extended (12 weeks-long) laboratory projects covering different aspects of nanoscience and nanotechnology.Also during this time, students will have an opportunity to learn about the available Ph.D. research projects through presentations by potential supervisors and visits to research labs. It is expected that many projects will be interdisciplinary, with co-supervision by academics from different Schools/Departments, providing students with access to the world-class facilities.... [-]


EngD in Additive Manufacturing (EPSRC Centre for Doctoral Training)

The University of Nottingham - Faculty of Engineering
Campus 4 years August 2018 United Kingdom Nottingham

Discovery, understanding, and innovation in Additive Manufacturing (AM) is a key element of the research strategy of both this CDT and the EPSRC Centre in AM. The overriding concerns of AM research and the broader community prioritize process control (repeatability) and the effects of (multi) material deposition – be this from a design, manufacturing or material standpoint. [+]

Research themes

Discovery, understanding, and innovation in AM is a key element of the research strategy of both this CDT and the EPSRC Centre in AM. The overriding concerns of AM research and the broader community prioritize process control (repeatability) and the effects of (multi) material deposition – be this from a design, manufacturing or material standpoint. This broader research challenge not only exists to counter the lack of innovation currently afforded by current AM processes and systems but also the requirements of new multi-material AM that aims to produce graded and multi-functional components in single builds.

The CDT has identified a number of cross-cutting themes to tackle the research challenges and move towards the successful deployment and increased efficacy of AM and 3DP.... [-]


EngD in BBSRC (Biotechnology and Biological Sciences Research Council) Doctoral Training Partnership

The University of Nottingham - Faculty of Engineering
Campus 4 years October 2018 United Kingdom Nottingham

Our 4-year fully funded PhD programme offers projects aligned with the BBSRC strategic priorities in Food Security, Industrial Biotechnology, and Bioenergy and world-class Bioscience (Molecules, Cells, and Organisms). [+]

We offer talented graduates the opportunity to engage in the globally recognized research environment of The University of Nottingham.

Advances in the biosciences offer genuine opportunities to focus on the worldwide challenges such as food security, new sources of energy and the development of sustainable sources for chemical products.

Our training programme is fashioned to the individual needs of the student to ensure that they are equipped with the skills and experience they need to take them through their PhD journey and beyond into academic and other career opportunities.

Students on the programme will spend time in the labs on three mini-projects to give a wide variety of experience and skills before starting work on their PhD project.... [-]


PhD Sustainable Chemistry (Doctoral Training Centre PhD, Digital Economy Centre for Doctoral Training PhD)

The University of Nottingham - Faculty of Engineering
Campus 4 years August 2018 United Kingdom Nottingham

The EPSRC CDT in Sustainable Chemistry is a four-year programme that offers fully-funded studentships to 14 students with a background in chemistry, engineering or biosciences. [+]

The EPSRC Centre for Doctoral Training in Sustainable Chemistry was developed in collaboration with industry and as a partnership of several disciplines, including chemistry, engineering, biosciences, and business. The center aims to provide students with first-class research training as well as the technical, theoretical and entrepreneurial skills to enable them to become champions in sustainable chemistry.

Programme overview

The EPSRC CDT in Sustainable Chemistry is a four-year programme that offers fully-funded studentships to 14 students with a background in chemistry, engineering or biosciences.

During the first year, students will develop their main research project and then work on this for the next three years. As well as academic training, students will further benefit from a professional skills programme and practical laboratory skills training.... [-]


PhD Sustainable Energy Technology

The University of Nottingham - Faculty of Engineering
Campus 3 years June 2018 United Kingdom Nottingham

PhD projects in the area of sustainable energy technology explore how new and renewable technologies may be harnessed at the scale of buildings and the wider built environment. [+]

Subject areas covered include:

combined heat power systems cooling technologies heat power cycles energy storage eco-cities/smart cities sustainable building materials vehicles, transport, and pollution control photovoltaic thermal systems; solar energy systems (e.g. solar powered cooling); wind energy solar water desalination systems sustainable waste management and disposal clean fossil fuel and carbon capture technologies

This course requires a 2:1 or international equivalent and/or a master's degree at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element).

It is usually completed over a period of around three years.

Facilities

You will have access to computing facilities, complete with the software you will need, building technology laboratories and technical workshop, digital fabrication suite and model making workshop will provide you with additional tools for investigative analysis.... [-]


PhD Mechanical Engineering

The University of Nottingham - Faculty of Engineering
Campus 3 years June 2018 United Kingdom Nottingham

PhD projects can cover many different fields within this discipline, for example, thermodynamics/fluid mechanics, structural dynamics, mechanics, and design. [+]

This PhD is based on the Faculty of Engineering. This provides the opportunity to undertake a PhD in a wide range of research areas and work across traditional research boundaries being part of interdisciplinary teams.

The research work within the faculty spans a range of applications including medicine, aerospace and automotive engineering, energy and the construction industry, sustainable design and development and it includes work from the most fundamental studies up to near-commercial investigations.

This course requires a 2:1 or international equivalent and/or a master's degree at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element).

... [-]

PhD Materials Engineering and Materials Design

The University of Nottingham - Faculty of Engineering
Campus 3 years June 2018 United Kingdom Nottingham

Research involving materials processing and characterization with a diversity of applications. MPhil/ Ph.D. projects are specialized research projects defined in conjunction with supervisors and can cover many different fields within this discipline, for example, nanomaterial engineering, bioengineering, laser processing and advanced composite materials to name a few fields. [+]

This course requires a 2:1 or international equivalent and/or masters at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element). It is usually completed over a period of around three years.

Facilities

Facilities include a range of materials-testing and characterisation techniques, including an electron microscope suite, networked computers to support computer-aided design (CAD) and computer-aided engineering (CAE) using industry-standard software packages; solid mechanics, thermodynamics, fluid mechanics, vibration, control, mechatronics; a full range of wind tunnels including a climatic tunnel; aero-engine test rigs and associated equipment and processes; fully automated 3D and 2D laser Doppler Anemometers and particle image velocimeters; a water jet cutting machine; high precision scales; and a welding system.... [-]


PhD Manufacturing Engineering

The University of Nottingham - Faculty of Engineering
Campus 3 years June 2018 United Kingdom Nottingham

Manufacturing engineering involves the research and development of systems, processes, machines, tools, and equipment. Projects areas can cover many different fields within this discipline, for example, design, manufacturing, assembly, measurement, testing, and modeling. [+]

Manufacturing engineering involves the research and development of systems, processes, machines, tools, and equipment. Projects areas can cover many different fields within this discipline, for example, design, manufacturing, assembly, measurement, testing, and modeling.

This Ph.D. is based within the Faculty of Engineering. The research work within the faculty spans a range of applications including medicine, aerospace and automotive engineering, energy and the construction industry and it includes work from the most fundamental studies up to near-commercial investigations.

This course requires a 2:1 or international equivalent and/or a master at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element). It is usually completed over a period of three years but is also available over four years.... [-]


PhD Human Factors

The University of Nottingham - Faculty of Engineering
Campus 3 years June 2018 United Kingdom Nottingham

Human factors research focuses on the multidisciplinary research spanning studies of the interaction between humans, machines, and technology to develop the products and systems that we use every day. [+]

PhD topics can cover many different fields within this discipline, for example, design, manufacturing, assembly, measurement, testing, and modeling.

This course requires a 2:1 or international equivalent and/or a master's degree at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element). It is usually completed over a period of around three years.

Facilities

Within the Human Factors Research Group (HFRG) we possess a wide range of technical facilities which are used for research and consultancy projects, as well as for teaching.The Usability and Ergonomics Laboratory constitutes a self-contained space containing a wide range of video and data capture equipment. As a result, we are able to conduct usability and ergonomics evaluation studies in which participants’ behavior can be observed and measured in a controlled fashion.The HFRG Transport Simulation Laboratory enables our research work to be conducted in a safe, controlled and cost-effective environment. This has been of specific importance in out transport-related work, where we currently possess hi-fidelity car, motorcycle, and train simulators.... [-]